| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
nfs4_server_common_setup() allocates server->delegation_hash_table
first, but server->destroy - the only path that frees the table via
nfs4_destroy_server() - is not assigned until the very end of the
function. If any intermediate step fails (the is_ds_only_client()
check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()),
the function returns with server->destroy still NULL, so the caller's
nfs_free_server() skips the destroy callback and the hash table is
leaked (4 KiB per attempt with the default delegation watermark).
This is trivially reachable from userspace: every failed NFSv4 mount
leaks one allocation. A client that persistently retries a mount that
cannot succeed leaks kernel memory without bound. Observed in
production where a Longhorn backup poller retried mount.nfs4 against
an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of
unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated
12 GiB of leaked slab before the source was identified via the
kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc).
Reproducer:
# server exports NFSv3 only (or export path absent for v4)
while :; do mount -t nfs4 <server>:/missing /mnt; done
# watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration
Free the table on the error paths between the allocation and the
assignment of server->destroy. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path
When the server returns a new layout stateid while a valid one is still
held, pnfs_layout_process() calls pnfs_mark_matching_lsegs_return() on
the on-stack free_me list and jumps to out_forget. Segments whose
reference count drops to zero are unlinked from lo->plh_segs and moved
to free_me by mark_lseg_invalid(); for an idle cached segment the layout
header holds the only reference, so this happens on the first decrement.
out_forget never drains free_me -- only the success path calls
pnfs_free_lseg_list().
Commit 814b84971388 ("pNFS/NFSv4: Fix a layout segment leak in
pnfs_layout_process()") added the drain; commit 08bd8dbe8882
("pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()")
removed it while switching the destination to lo->plh_return_segs, which
is drained elsewhere. Commit fb700ef02676 ("NFSv4.1: Simplify layout
return in pnfs_layout_process()") switched the destination back to
free_me without restoring the drain.
Restore the pnfs_free_lseg_list() call. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the newly created
one.
Check the error from btrfs_create_dio_extent() before replacing the
map and drop the input extent map on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: release message context on send failure
ecryptfs_send_message_locked() moves a message context from the free
list to the allocated list before sending the request to the userspace
daemon.
If ecryptfs_send_miscdev() fails, the context is left on the
allocated list and cannot be reused. Move it back to the free list on
failure and clear the caller's pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: unregister connector callback on init failure
uvesafb_init() registers the v86d connector callback before registering
the platform driver. If platform_driver_register() fails, the function
returns the error directly and leaves the connector callback registered.
The later platform-device failure path already unregisters the callback.
Add the same cleanup before the final return when platform-driver
registration fails.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
ipip: fix skb leak in collect_md mode when metadata_dst allocation fails
In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb
when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and
mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv()
and tunnelmpls4_rcv() read the zero return as "the packet has been
consumed" and do not free it either. The skb is leaked.
The other tunnel drivers all dispose of the packet at this point:
ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return
PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0.
Jump to the existing drop label instead. It frees the skb and still
returns 0, so the packet keeps being reported as consumed, which is what
we want here: the outer header has already been pulled, and neither the
remaining handlers nor an ICMP unreachable have any use for it.
Triggering this needs an ipip or mplsip tunnel in collect_md mode and an
atomic allocation failure, which is why it has gone unnoticed. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: scp: Fix device reference leak on failed lookup
Make sure to drop the reference taken to the SCP device when attempting
to look up its driver data before the driver has been bound.
Note that holding a reference to a device does not prevent its driver
data from going away. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25890: Fix power_supply reference leak
bq25890_fw_probe() acquires a reference to a secondary charger using
power_supply_get_by_name(), but the reference is not released on later
probe failures or on driver detach.
In particular, failures after bq25890_fw_probe() returns successfully,
such as a failure in bq25890_hw_init(), also leak the reference.
Register a device-managed cleanup action immediately after acquiring
the secondary charger. This releases the reference on all subsequent
probe failures and on driver detach.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts()
plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but
does not unwind them when later step fails.
If platform_get_irq() or either irq_create_mapping() fails
in plda_init_interrupts(), the domains are never deinitialized. If
irq_create_mapping() fails, port->intx_irq stays initialized.
Hence, remove the IRQ domains in the error path by calling
plda_pcie_irq_domain_deinit().
Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and
msi_irq mappings itself before removing their domains, the msi_irq
mapping failure path can go directly to err_irq_domain_deinit instead of
disposing of port->intx_irq separately first.
This issue was found by automated review of sashiko-bot
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommu_mock_device_add() first calls iommu_fwspec_init(), which on
success allocates both dev->iommu (via dev_iommu_get()) and
dev->iommu->fwspec. If the subsequent device_add(dev) call fails,
the error path only calls iommu_fwspec_free(dev), which frees
fwspec but leaves dev->iommu still allocated.
This triggers the following kmemleak report when fuzzing with Syzkaller:
BUG: memory leak
unreferenced object 0xffff888011e0a200 (size 192):
comm "syz.1.1695", pid 24885, jiffies 4295222527
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................
backtrace (crc 25df5bb3):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4575 [inline]
slab_alloc_node mm/slub.c:4899 [inline]
__kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408
iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087
iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385
mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline]
iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline]
iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072
iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev)
in the device_add() failure path. dev_iommu_free() frees both fwspec
and the outer dev_iommu struct and clears dev->iommu. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Release current IOAS on xa_store() failure
iommufd_take_all_iova_rwsem() takes an object reference and the
iova_rwsem write lock before storing the IOAS in the temporary ioas_list
xarray.
If xa_store() fails, the current IOAS has not been inserted into
ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS
objects already present in that xarray, so it cannot release the current
IOAS.
Release the current IOAS rwsem and object reference before unwinding the
previously stored entries. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:msghandler: Cancel work cleanly on an error
If an error occurs during startup of an IPMI interface, it may have
scheduled work to run. The work needs to be canceled before the
interface can be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Release the Rx HopID that was handed out on mismatch
tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range()
as the lower bound, so a taken id is not an error there: the allocator
returns the next free one above it. tbnet_connected_work() asks for the
peer's transmit path, treats any other id as a failure and returns
without releasing what it got, so that allocation stays live for the rest
of the XDomain connection with nothing left holding a reference to it.
Release the id when it is not the one we asked for, the same way the
error unwind at the end of the function releases the expected one. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Fail TX enqueue when the QP link is down
Commit f195a1a6fe41 ("ntb: Drop packets when qp link is down") meant to
make ntb_transport_tx_enqueue() drop packets submitted while the QP link
is down, but it only returns 0 without consuming the packet. Zero means
success by this function's contract, so ntb_netdev reports NETDEV_TX_OK
and forgets the skb: nothing queued it, nothing frees it, and it leaks,
one skb for every transmit racing a link-down.
Return -ENOLINK instead, restoring the contract that a non-zero return
leaves the buffer owned by the caller. With the preceding patch,
ntb_netdev frees the skb on non-retryable enqueue failures and returns
NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking
or entering a busy retry loop. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Reject oversized TX buffers
ntb_process_tx() handles an oversized buffer by calling tx_handler()
with a NULL data pointer and returning success. ntb_netdev therefore
neither frees the skb in its completion callback nor takes its enqueue
error path, leaking it.
Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring
a queue entry and return -EMSGSIZE. The caller retains ownership of the
buffer, and the preceding netdev patch frees the skb when enqueue
returns this permanent error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start()
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
supported Intel DVM wireless hardware and firmware to test with, no
runtime testing was able to be performed. |
