| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Axolotl before 0.19.0 contains a remote code execution vulnerability in the multipack patch path where trust_remote_code defaults to None instead of False, causing the security guard to be bypassed. Attackers can execute arbitrary Python code by crafting a malicious Hugging Face model repository selected as base_model, which is loaded with hardcoded trust_remote_code=True during AutoModelForCausalLM.from_pretrained. |
| Untrusted pointer dereference in Microsoft Windows SCSI Class System File allows an unauthorized attacker to elevate privileges with a physical attack. |
| Untrusted pointer dereference in Windows Failover Cluster allows an unauthorized attacker to execute code over a network. |
| Hoverfly is an open source API simulation tool. Prior to version 1.12.8, when Hoverfly is running in Diff mode, the `AddDiff()` function writes to the shared `responsesDiff` map without any synchronization (no mutex). When multiple proxy requests are processed concurrently (the normal case for any proxy), the concurrent map writes trigger Go's built-in race detector which causes a `fatal error: concurrent map read and map write`, immediately killing the entire Hoverfly process. This is trivially exploitable by sending multiple simultaneous requests. Version 1.12.8 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: don't free a hibernation slot that is in the swap cache
A slot with a folio in the swap cache is freed when the folio leaves the
cache, not when its count drops. swap_put_entries_cluster() follows that
rule. swap_free_hibernation_slot() does not, it calls
__swap_cluster_free_entries() whether or not a folio sits on the slot.
Cluster readahead can put one there. It walks a raw page_cluster sized
window of offsets around the faulting entry, and a hibernation slot passes
__swap_cache_add_check() because it is not a folio and its count is not
zero. Freeing the slot then clears the entry under that folio.
The folio is now unreachable from the swap table, and the offset goes back
to the allocator. The folio is still on the LRU though, so reclaim can
pick it up later. It then takes the old offset out of folio->swap and
overwrites the table entry there, which by then may belong to someone
else.
This bug can trigger silent memory corruption, process crashes, or data
instability across completely unrelated userspace applications - typically
occurring when uswsusp is preparing the hibernation image.
I found this while working on giving hibernation slots their own marker in
the swap table, which I had discussed with Kairui.
(https://lore.kernel.org/linux-mm/abp7aDgYLrxF3Me8@KASONG-MC4/) As far as
I know there are no reports, so there is no Reported-by/Closes to add.
Check for a cached folio before freeing. The slot is then left in the
ordinary state where only the swap cache holds it, and it is freed when
the folio leaves the cache, either through the reclaim below or through
normal reclaim later. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: skip non-present PMDs when queueing folios
Patch series "mm: handle device-private PMDs in walk callbacks", v3.
Since commit 368076f52ebe ("mm/huge_memory: add device-private THP support
to PMD operations") a PMD may hold a device-private swap entry whenever an
HMM-based GPU driver migrates an anonymous THP folio to device memory via
migrate_vma_pages().
pmd_trans_huge_lock() succeeds for such PMDs (pmd_is_huge() returns true
for any non-present, non-none huge PMD), so several MM walk callbacks that
used to assume present THP or migration entry are now reachable with a
device-private PMD. The results range from a VM_BUG_ON() firing on debug
kernels, to an oops on a bogus vmemmap dereference, to silently isolating
an unrelated live folio from LRU in the aliasing case.
This patch (of 3):
queue_folios_pmd() is called under pmd_trans_huge_lock(), whose
pmd_is_huge() check returns true for any non-present, non-none PMD
softleaf. Passing such a PMD to pmd_folio() treats the softleaf encoding
as a hardware PFN and can return a bogus folio pointer.
Mirror queue_folios_pte_range(): handle non-present entries before looking
up a folio. Keep migration entries counted as failures, but skip other
non-present PMDs such as device-private entries.
Potential trigger: an HMM-based GPU driver migrates an anonymous THP folio
to device memory via migrate_vma_pages(), leaving a device-private PMD.
Userspace then calls mbind(), migrate_pages() or set_mempolicy_home_node()
on that range. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
migrate_pages_batch() unmaps each folio before moving it, and every
unmap runs the mmu_notifier invalidate callbacks. On KVM hosts
try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() ->
tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps
the CPU busy for a long time.
The loop already calls cond_resched(), but on PREEMPTION kernels that is
a no-op, and involuntary preemption is not a Tasks-RCU quiescent state.
A long batch therefore never reports a quiescent state, and the
migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the
Tasks-RCU grace period for minutes, which is common at Meta fleet:
INFO: rcu_tasks detected stalls on tasks:
0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task
Call Trace:
tdp_mmu_zap_leafs
tdp_mmu_next_root
gfn_to_pfn_cache_invalidate_start
kvm_mmu_notifier_invalidate_range_start
__mmu_notifier_invalidate_range_start
try_to_migrate_one
try_to_migrate
migrate_pages_batch
migrate_pages
compact_zone
compact_node
kcompactd
kthread
Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even
when cond_resched() does nothing.
This has also been discussed at [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded time, and the scan loop
in shrink_lruvec() only calls cond_resched(), which is a no-op on
PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent
state, so the reclaiming task never reports one and becomes a holdout.
Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state
even when cond_resched() does nothing.
PS: This has been discussed in [1] |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event_mm+0x51/0x1d0 Write of size 4 at addr
ffff888005010d30 by task init/44
Call Trace:
<TASK>
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
current_user_event_mm+0x51/0x1d0
user_events_ioctl+0x82e/0x15c0
__x64_sys_ioctl+0x139/0x1c0
do_syscall_64+0xce/0x450
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 44:
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x180/0x3a0
user_event_mm_alloc+0x3c/0x1f0
current_user_event_mm+0x88/0x1d0
Freed by task 42:
__kasan_slab_free+0x43/0x70
kfree+0x13a/0x390
process_one_work+0x696/0xf90
worker_thread+0x420/0xba0
The fix simply clears the copied pointer before any possible failure.
In case of failure, the child then has nothing to free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(),
which frees every sub-buffer of the ring buffer, including the reader
page, and replaces them with newly allocated ones.
Readers of trace_pipe hold pointers into those pages. ring_buffer_peek()
looks up an event under cpu_buffer->reader_lock but returns the event
pointer after dropping the lock, and peek_next_entry() then calls
ring_buffer_event_length() and ring_buffer_event_data() on it. If the
sub-buffer order is changed in that window, the reader dereferences
freed memory:
BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430
Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002
Freed by:
free_buffer_page kernel/trace/ring_buffer.c:398 [inline]
ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444
buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221
Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change.
This is the lock trace_pipe readers already hold across their entire
peek-and-print loop, so the swap can no longer race with a reader that
is dereferencing a peeked event. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free with same-name named triggers
When two hist triggers on different events are registered with the same
name=, the second one reuses the first as named_data. Both are added to
tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(),
because save_hist_vars() is called before event_trigger_register() while
the named reuse is only detected later, in hist_register_trigger().
In the named-data branch hist_register_trigger() then frees the second
histogram's hist_data via destroy_hist_data(), but never removes its
tr->hist_vars list entry, leaving a dangling pointer and leaking the
trace_array reference it holds.
A later hist trigger that references a variable makes find_var_file()
walk tr->hist_vars and dereference the freed hist_data. The bug is
reproducible from userspace by writing three hist triggers to tracefs:
cd /sys/kernel/tracing
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger
echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger
The third write panics the kernel:
BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290
Read of size 8 at addr ffff888001f8a0e0 by task sh/1
CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N
Call Trace:
find_var_file.part.0
find_event_var
parse_atom
parse_expr
__create_val_field
event_hist_trigger_parse
trigger_process_regex
event_trigger_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Allocated by task 1:
event_hist_trigger_parse
Freed by task 1:
hist_register_trigger+0x618/0xa30
event_hist_trigger_parse
The buggy address belongs to freed 2048-byte region
Oops: general protection fault ... RIP: find_var_file.part.0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix by removing the hist_data from tr->hist_vars and releasing the
trace_array reference in the named-data branch of hist_register_trigger()
before freeing the hist_data. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO mport character device
interface. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: thunderbolt: Disable work before freeing tbt on remove
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound
card teardown and immediately frees the underlying struct snd_uac_chip
context. However, snd_card_free_when_closed() returns asynchronously
while ALSA control elements (kctls) remain open in userspace.
When userspace control applications access or close these open file
descriptors, kctl callbacks attempt to dereference kctl->private_data
pointing to &uac->c_prm or &uac->p_prm within the freed uac structure,
resulting in a use-after-free (UAF) memory corruption.
Fix this issue by deferring the destruction of struct snd_uac_chip until
all references to the ALSA sound card are released. Register a custom
card->private_free callback (u_audio_card_free) during g_audio_setup()
that frees uac and its associated playback/capture request and ring
buffers only when the sound card reference count drops to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
In uvc_function_bind() error path, we use usb_ep_free_request which
uses uvc->control_req but does not set it to NULL afterwards. Thus,
uvc->control_req is a dangling pointer causing a UAF. Also we do not set
the uvc->control_buf pointer to NULL after freeing it, which is another
dangling pointer. Fix it by setting uvc->control_req to NULL after we run
usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the
same for uvc_function_unbind(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock
nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with
list_for_each_entry_safe(ni, tmp, ...). For each expired entry it
sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the
source vfsmount, then reacquires the lock to list_del + kfree the
entry and continue iterating via the macro's saved tmp pointer.
The nsui_busy flag protects the current ni from concurrent
nfsd4_ssc_setup_dul() finders during the lock-drop window, but it
does not pin tmp. Another nfsd RPC thread that fails its source-
server mount and reaches nfsd4_ssc_cancel_dul() will, during that
same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount
item, and release the lock. If that item is the saved tmp of the
expire walk, the next iteration dereferences a freed
nfsd4_ssc_umount_item.
Restart the walk from the head after the mntput() unlock window so
no saved next pointer survives the lock-drop. The list is bounded
by the number of active inter-server source mounts (typically small)
and the expire delayed-work runs periodically rather than per-IO,
so the restart is cheap. |
