| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Privilege Management vulnerability in ESET AV Remover (standalone) allows Privilege Escalation via especially crafted RPC. |
| A flaw was found in bubblewrap. During sandbox setup, creating files or directories under the new root can follow a parent symlink onto the host via /oldroot, writing attacker-chosen paths outside the sandbox as the launching user. This happens before the sandboxed process starts. This issue is GHSA-pxhw-h44j-8pfx. It is fixed in bubblewrap 0.12.0. |
| Missing authentication for critical function vulnerability in Yordam Informatics Technology Consulting, Training, and Electronic Systems Industry and Trade Inc. Library Reservation System allows Input Data Manipulation.
This issue affects Library Reservation System: before v22.2. |
| Certain KGUARD DVR devices running vulnerable firmware expose a system command execution service on all network interfaces without requiring authentication. A remote unauthenticated attacker with network access to the affected service can execute arbitrary system commands on the device, potentially resulting in complete compromise of the DVR.
The vulnerability is known to have been exploited in the wild by the Mirai_ptea (Rimasuta) and Mirai_aurora botnets for malware propagation and subsequent DDoS activity. The vulnerability was reported to affect firmware dating from 2016, while firmware released after 2017 appears to mitigate the issue by restricting the affected service to the localhost interface (127.0.0.1) instead of exposing it on all interfaces (0.0.0.0).
The affected-device list reported by Netlab includes many D1004NR, D1008NR, D1016NR, D1104, D1104NR, D1108NR, D1116NR, D1132NR, D2116NR, D97xx, D98xx, and D99xx variants and several associated hardware revisions
The exploit is included in some version of rapperbot and exploited in 2026. This assignment has been made to document the active exploitation and lack of documentation from the vendor. |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows unsafe vehicle motion via improper handling of expired trajectory data in the replanning pipeline |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the EGOReplanFSM::checkCollisionCallback() |
| An issue in Robotics-STAR-Lab (SYSU STAR Group) RACER Tested affected version: commit abcdef1234567890 allows an attacker to cause a denial of service via the exploration state machine |
| A cross-site scripting vulnerability exists in SHIRASAGI, which may allow an attacker to execute an arbitrary script in the web browser of a user who accesses a website using the affected product. |
| An authorization bypass vulnerability exists in SHIRASAGI through a user-controlled key, which may allow an unauthorized attacker to retrieve files from the groupware's shared file feature. |
| Improper neutralization of directives in dynamically evaluated code ('eval injection') vulnerability in Apache Camel K.
An improper neutralization of directives in dynamically evaluated Maven configuration allows tenant-controlled repository content to influence code execution within the operator pod, potentially enabling tenants to execute arbitrary code with the privileges of the operator.
This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2.
Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Armiya Information Technologies Ltd. Co. Access Control System allows SQL Injection.
This issue affects Access Control System: before Versiyon 2. |
| URL redirection to untrusted site ('open redirect') vulnerability in Armiya Information Technologies Ltd. Co. Access Control System allows Fake the Source of Data.
This issue affects Access Control System: before Versiyon 2. |
| A stack-based buffer overflow vulnerability exists in the Bosch Sensortec BHI360 SensorAPI(C-Library) in versions up to and including commit d6b200416a.
The vulnerability is located within the FIFO parsing and debug logging subsystem inside the function bhi360_parse_debug_message() in bhi360_parse.c (lines 1852-1875).
The parser trusts the first payload byte of a debug frame as the message length (msg_length) and copies that many bytes into a fixed-size 17-byte stack buffer (debug_msg) via memcpy without performing any bounds checking.
A locally or physically positioned attacker (e.g., via a malicious sensor, counterfeit hardware module, or a Man-in-the-Middle on the communication bus) can exploit this vulnerability by injecting a crafted debug frame with a length byte exceeding 16.
This corrupts adjacent stack data, including the saved return address.
Furthermore, because the overflowed buffer is subsequently passed to a printf-style logging sink, the attacker can supply format string specifiers (e.g., %n) to execute arbitrary code on the host microcontroller/SoC or cause a reliable system crash (Denial of Service). |
| A stack-based buffer overflow vulnerability exists in the Bosch Sensortec BHI385 SensorAPI (C library) within the debug message parser function bhi385_parse_debug_message (located in bhi385_parse.c).
The function parses FIFO events and extracts an 8-bit message length directly from the attacker-controlled event payload (callback_info->data_ptr[0]) without enforcing bounds checks or clamping the value.
When copying the payload into a fixed-size stack buffer of 17 bytes (uint8_t debug_msg[17]) via memcpy, providing a length byte greater than 16 causes the function to write past the allocated stack boundary.
This memory corruption can be triggered by a malicious or compromised sensor or bus participant, leading to a firmware crash, Denial of Service (DoS), or potentially the execution of arbitrary code via adjacent stack data corruption. |
| An out-of-bounds read vulnerability was discovered in the Bosch BME690 SensorAPI (C-driver) in version v1.0.3 and prior, specifically within the field data parsing logic in read_all_field_data (bme69x.c).
The driver prefetches heater configuration registers into a contiguous 30-byte stack buffer (set_val) mapping IDAC, RES_HEAT, and GAS_WAIT tables.
When parsing sensor field data, the gas_index is extracted using a 4-bit mask (0..15) but lacks boundary verification against the valid range (0..9).
An attacker or a compromised peripheral mimicking a sensor on the I2C/SPI bus could return a payload with a gas index value of 10 or higher.
This causes the driver to perform an out-of-bounds array access (set_val[20 + gas_index]), reading up to 6 bytes past the stack buffer.
The leaked out-of-bounds byte is then written into the public gas_wait field, which may lead to measurement corruption or leak adjacent stack memory when telemetered or logged. |
| A heap-based buffer overflow vulnerability in the PC bridge protocol decoder of BoschSensortec COINES_SDK (versions 2.10 through 2.12.2) allows attackers to cause a denial of service (process crash) or potentially execute arbitrary code.
The bridge decoder ({{bridge_decoder.c}}) trusts the packet length field provided by the external device and forwards it to the host response queue ({{mqueue_add_data}}) without validating the bounds of the destination buffer.
A malicious or compromised USB or Bluetooth Low Energy (BLE) peripheral can advertise a payload size up to ~3 KB, which exceeds the default queue slot size of 255 bytes.
This results in an unbounded heap overwrite ({{memcpy}}), corrupting adjacent heap metadata on the host system when processing the device's response. |
| An issue was discovered in Bosch Sensortec COINES_SDK versions 2.0 through 2.11.
The host streaming API function {{coines_read_stream_sensor_data()}} fails to validate the boundaries of the caller-provided destination buffer.
Internally, the stream processing mechanism in {{comm_intf_process_stream_response()}} discards the requested {{number_of_samples}} argument and copies the entirety of the streaming ring buffer's accumulated data into {{coines_stream_rsp_buf}}.
Subsequently, {{coines_read_stream_sensor_data()}} unconditionally executes a {{memcpy}} of the ring buffer size into the caller-provided buffer without verifying if the destination memory allocation is large enough.
A malicious or compromised hardware board connected via USB or BLE can exploit this by streaming a high volume of sensor samples, causing a heap or stack-based buffer overflow on the host desktop environment.
This can result in a Denial of Service (DoS) or potential arbitrary code execution on the host machine. |
| The Redux Framework plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Slider field in User Profile settings in versions up to and including 4.5.13.1. This is due to insufficient input sanitization in the user_meta_save() function (which only sanitizes array values, not scalar values) and improper output escaping in the Redux_Slider::render() method, which outputs slider values into unquoted HTML attributes. The vulnerability also exploits the fact that the clean_default() method only casts values to numeric types when they are empty or out of bounds, allowing malicious strings like '1 tabindex=0 autofocus onfocus=alert(1) x=' to pass validation through PHP's loose type comparison. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts into their user profile that will execute whenever an Administrator navigates to view the attacker's profile page. |
| Joomla Extension - joomshaper.com - Unvalidated Email Destination & Form Manipulation in Booking Requests in SP Property < 4.1.4 - Booking inquiries previously relied on client-submitted hidden fields for recipient routing, allowing potential email manipulation. |
| Joomla Extension - joomshaper.com - Unauthenticated SQL Injection in Property Search and Map Filtering in SP Property < 4.1.4 - The property search and listing query builders assembled several WHERE and ORDER BY clauses (zipcode, sorting, price_range_dropdown, and psize_range_dropdown) by directly concatenating raw request parameters into SQL strings without quoting or type casting. An unauthenticated remote attacker could execute boolean-based or time-based blind SQL injection to extract sensitive data from the database. |
