| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to a denial of service via Excessive Allocation (CAPEC-130). A user-supplied list of document fields accepted by the Kibana Playground for RAG feature was neither bounded in length nor de-duplicated before it was used to assemble the response for each matching document. A single crafted request could therefore make Kibana build a response far larger than the data it was derived from, and the resulting processing and memory pressure exhausts the resources of the Kibana instance. |
| Unauthenticated Denial of Service Attack in Really Simple SSL <= 9.8.0 versions. |
| stomper 5e2741e is vulnerable to Denial of Service. A malicious client can send partial STOMP frames and keep the TCP connections open, which, combined with the broker s use of edge-triggered epoll (EPOLLET) and MSG_PEEK in recv(), causes sockets to enter a permanent half-read state. When enough such connections accumulate, the broker stops receiving any further epoll events for those sockets and eventually hangs in epoll_wait, effectively refusing to process new messages. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Do not free stack buffer
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations. |
| An issue in the NssaiAvailabilitySubscriptionCreate component of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted POST request. |
| Dell PowerStore contains a Command Injection vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to execute arbitrary commands with root privileges. |
| Apache Wicket enforces the upload limits configured on a form or upload field while parsing a multipart request with Apache Commons FileUpload. If the request body has already been consumed by another component, Commons FileUpload returns no items and Wicket falls back to reading the upload through HttpServletRequest#getParts(). The per-file size limit (for example Form#setFileMaxSize) and the file count limit (Form#setFileCountMax) are not applied to the parts obtained that way, and no exception is raised, so the upload is processed as though those limits had been satisfied. A remote uploader can therefore submit files that are larger, or more numerous, than the application permits, up to whatever the component that parsed the request allows. A part carrying no Content-Type header is additionally read into memory in full during parsing, so the size of that allocation is determined by the request and bounded only by those same external limits.
The total upload size limit (Form#setMaxSize) is not affected. Commons FileUpload compares the declared Content-Length against it before reading the body, so a request declaring an oversized length is rejected before the fallback is reached.
The fallback is reached in deployments where a servlet or filter has already parsed the request body — for example a servlet annotated with @MultipartConfig, Spring Boot's multipart resolver, or any filter that calls HttpServletRequest#getParameter() on a multipart request. It applies to the Wicket components that accept uploads on that path, including Form with FileUploadField, FileUploadToResourceField and AjaxFileDropBehavior. Applications that configure neither a per-file nor a file-count limit are not affected, as Wicket applies neither by default.
This issue affects Apache Wicket: from 8.0.0 through 8.18.0, from 9.0.0 through 9.23.0, from 10.0.0 through 10.10.0.
Users are recommended to upgrade to version 8.19.0, 9.24.0 or 10.11.0, which fix the issue. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. As a workaround, configure equivalent limits in the component that parses the request — for example spring.servlet.multipart.max-file-size and max-request-size, or maxFileSize and maxRequestSize in @MultipartConfig or in the web.xml <multipart-config> element. |
| An issue was discovered in LibreNMS 1.65. A remote authenticated attacker with normal privileges can execute arbitrary shell commands through a command injection in the /graph.php API endpoint. |
| In Reactor Core, applications that use the Flux.bufferTimeout operator with fairBackpressure enabled are vulnerable to a Denial of Service (DoS) condition.
Reactor Core 3.8.0 - 3.8.6
Reactor Core 3.7.19 and earlier |
| go-libp2p is the Go implementation of the libp2p Networking Stack. Prior to versions 0.27.8, 0.28.2, and 0.29.1 malicious peer can use large RSA keys to run a resource exhaustion attack & force a node to spend time doing signature verification of the large key. This vulnerability is present in the core/crypto module of go-libp2p and can occur during the Noise handshake and the libp2p x509 extension verification step. To prevent this attack, go-libp2p versions 0.27.8, 0.28.2, and 0.29.1 restrict RSA keys to <= 8192 bits. To protect one's application, it is necessary to update to these patch releases and to use the updated Go compiler in 1.20.7 or 1.19.12. There are no known workarounds for this issue. |
| A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service. |
| A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior. |
| The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. |
| The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received).
A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds.
Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_typescript allows an unauthenticated attacker to exhaust the BEAM atom table and abort the node via client-supplied RPC field names.
AshTypescript.FieldFormatter.convert_to_field_atom/2 in lib/ash_typescript/field_formatter.ex converts a client-supplied field name to an atom with String.to_atom/1 when no matching atom already exists. It delegates first to parse_input_field/2, which resolves the name with String.to_existing_atom/1 and falls back to returning the plain string; convert_to_field_atom/2 then mints an atom from that string rather than treating the name as unknown.
RPC field selection reaches it for every requested field name through AshTypescript.Rpc.FieldProcessing.FieldSelector, which resolves each name before checking that the field exists, with no allowlist, length bound, or rate limit. Atoms are never garbage collected, so each distinct name mints a permanent one and the VM aborts once the atom table limit is reached. A field name over 255 characters additionally raises an uncaught SystemLimitError.
This issue affects ash_typescript: from 0.1.0 before 0.18.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Undertow is a flexible performant web server used in JBoss EAP and WildFly. A flaw was found in how Undertow handles WebSocket connections. Specifically, certain configuration limits like message buffer sizes and session timeouts cannot be adjusted and default to being unlimited. This allows a remote attacker to send large amounts of data or maintain connections indefinitely, potentially crashing the server by exhausting its memory or other resources. |
| A denial-of-service security issue exists within ArmorStart® LT. The security issue stems from improper handling of a crafted HTTP PUT request sent to the embedded web server. This can result in a loss of web server availability |
