| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
[mani: removed timestamp from log] |
| A flaw was found in 389 Directory Server. A missing NULL pointer check in the paged results handling of op_shared_search allows an unauthenticated remote attacker to crash the LDAP server by sending a crafted sequence of search requests using the USE_ONE_BACKEND control, resulting in denial of service. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a NULL pointer dereference. |
| NVIDIA DGX Spark contains a vulnerability in the system firmware, where a privileged attacker could be able to cause a NULL pointer dereference. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
| mrubyc through 4.0.0 contains a null pointer dereference vulnerability in the op_enter() handler in src/vm.c when processing untrusted bytecode. Attackers can craft malicious .mrb bytecode files with OP_ENTER instructions at the top level to crash the embedding application and cause denial of service. |
| Null pointer dereference in Skype for Business allows an authorized attacker to deny service over a network. |
| Null pointer dereference in Active Directory Domain Services allows an authorized attacker to deny service over a network. |
| Null pointer dereference in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| A NULL Pointer Dereference vulnerability [CWE-476] vulnerability in Fortinet FortiOS 7.4 all versions, FortiOS 7.2 all versions, FortiPAM 1.9.0, FortiPAM 1.8 all versions, FortiPAM 1.7 all versions, FortiPAM 1.6 all versions, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.6.0 through 7.6.6, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions may allow an authenticated attacker to crash the httpsd daemon via crafted HTTP requests. |
| A security issue exists in MongoDB's 2dsphere index key generation that can cause a server crash due to a null pointer dereference. When a specially crafted GeoJSON document is inserted into a collection with a 2dsphere index, an inconsistency in geometry parsing can leave an internal object in an invalid, partially initialized state. During subsequent index key generation, access to this improperly initialized object results in a null pointer dereference that terminates the mongod process. An authenticated user with write access can use this to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ] |
| This CVE ID has been rejected as a duplicate. |
| PX4 Autopilot through 1.17.0 contains a null pointer dereference vulnerability in param_set_default_file() and param_set_backup_file() functions that allows attackers to crash the autopilot process. Attackers can invoke 'param select' or 'param select-backup' commands with no path argument from any PX4 shell to trigger the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: check master for NULL in xdp_master_redirect()
xdp_master_redirect() dereferences the result of
netdev_master_upper_dev_get_rcu() without a NULL check, but that helper
returns NULL when the receiving device has no upper-master adjacency.
The reach guard only checks netif_is_bond_slave(). On bond slave release
bond_upper_dev_unlink() drops the upper-master adjacency before clearing
IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window
still passes netif_is_bond_slave() while master is already NULL, and
faults on master->flags at offset 0xb0:
BUG: kernel NULL pointer dereference, address: 00000000000000b0
RIP: 0010:xdp_master_redirect (net/core/filter.c:4432)
Call Trace:
xdp_master_redirect (net/core/filter.c:4432)
bpf_prog_run_generic_xdp (include/net/xdp.h:700)
do_xdp_generic (net/core/dev.c:5608)
__netif_receive_skb_one_core (net/core/dev.c:6204)
process_backlog (net/core/dev.c:6319)
__napi_poll (net/core/dev.c:7729)
net_rx_action (net/core/dev.c:7792)
handle_softirqs (kernel/softirq.c:622)
__dev_queue_xmit (include/linux/bottom_half.h:33)
packet_sendmsg (net/packet/af_packet.c:3082)
__sys_sendto (net/socket.c:2252)
Kernel panic - not syncing: Fatal exception in interrupt
The missing check dates back to the original code; commit 1921f91298d1
("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master")
later added the master->flags read where the fault now lands but kept the
unconditional deref. Check master for NULL before use; a NULL master is
treated the same as one that is not up. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, matching rt6_mtu_change_route() and the
fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in
fib6_mtu().").
Oops: general protection fault, ... KASAN: null-ptr-deref in range
[0x00000000000002a8-0x00000000000002af]
RIP: 0010:fib6_nh_mtu_change+0x203/0x990
rt6_mtu_change_route+0x141/0x1d0
__fib6_clean_all+0xd0/0x160
rt6_mtu_change+0xb4/0x100
ndisc_router_discovery+0x24b5/0x2cb0
icmpv6_rcv+0x12e9/0x1710
ipv6_rcv+0x39b/0x410 |
| In the Linux kernel, the following vulnerability has been resolved:
block: Avoid mounting the bdev pseudo-filesystem in userspace
The bdev pseudo-filesystem is an internal kernel filesystem with which
userspace should not interfere. Unregister it so that userspace cannot
even attempt to mount it.
This fixes a bug [1] that occurs when attempting to access files,
because the system call move_mount() uses pointers declared in the
inode_operations structure, which for the bdev pseudo-filesystem
are always equal to 0. `inode->i_op = &empty_iops;`
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 23380067 P4D 23380067 PUD 23381067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI
CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:0x0
Call Trace:
<TASK>
lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460
open_last_lookups fs/namei.c:3550 [inline]
path_openat+0x953/0x2700 fs/namei.c:3780
do_filp_open+0x1c5/0x410 fs/namei.c:3810
do_sys_openat2+0x171/0x4d0 fs/open.c:1318
do_sys_open fs/open.c:1334 [inline]
__do_sys_openat fs/open.c:1350 [inline]
__se_sys_openat fs/open.c:1345 [inline]
__x64_sys_openat+0x13c/0x1f0 fs/open.c:1345
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <[email protected]>. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns. |
