| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP before 3.22.0 contains a use-after-free vulnerability in dvcman_channel_close and dvcman_call_on_receive due to improper synchronization of channel_callback access. A malicious RDP server can trigger a race condition by sending DYNVC_DATA and DYNVC_CLOSE messages concurrently, causing heap-use-after-free in the drdynvc client thread and potentially enabling remote code execution or denial of service. |
| Oj (Optimized JSON) is a JSON parser and Object marshaller packaged as a Ruby gem. Prior to 3.17.2, Oj::Doc iterators (each_value, each_child, each_leaf) were vulnerable to a heap use-after-free. When a Ruby block yielded during iteration calls doc.close or d.close, the document's heap memory is freed while the C iterator is still running. When control returns from the block, the iterator reads from the freed region, producing a use-after-free accessible from pure Ruby. This issue has been fixed in version 3.17.2. |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.
A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine
ksmbd_crypt_message() sets a NULL completion callback on AEAD requests
and does not handle the -EINPROGRESS return code from async hardware
crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns
-EINPROGRESS, ksmbd treats it as an error and immediately frees the
request while the hardware DMA operation is still in flight. The DMA
completion callback then dereferences freed memory, causing a NULL
pointer crash:
pc : qce_skcipher_done+0x24/0x174
lr : vchan_complete+0x230/0x27c
...
el1h_64_irq+0x68/0x6c
ksmbd_free_work_struct+0x20/0x118 [ksmbd]
ksmbd_exit_file_cache+0x694/0xa4c [ksmbd]
Use the standard crypto_wait_req() pattern with crypto_req_done() as
the completion callback, matching the approach used by the SMB client
in fs/smb/client/smb2ops.c. This properly handles both synchronous
engines (immediate return) and async engines (-EINPROGRESS followed
by callback notification). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: update file PMD counter before folio_put()
__split_huge_pmd_locked() updates the file/shmem RSS counter after
dropping the PMD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: Fix use-after-free during device removal
The driver was using devm_register_netdev() which causes unregister_netdev()
to be deferred until the devres cleanup phase, which runs after emac_remove()
returns. This creates a use-after-free window where:
1. emac_remove() is called, which tears down hardware (cancels work, detaches
modules, unregisters from MAL)
2. emac_remove() returns
3. devres cleanup runs and finally calls unregister_netdev()
During step 3, the network stack might still process packets, triggering
emac_irq(), emac_poll(), or other handlers that access now-freed hardware
resources (dev->emacp, dev->mal, etc.).
Fix this by replacing devm_register_netdev() with manual register_netdev()
and calling unregister_netdev() at the beginning of emac_remove(), before
any hardware teardown. This ensures the network device is fully stopped and
unregistered before hardware resources are released.
The change is safe because:
- dev->ndev is assigned very early in probe (before any error paths that
could bypass emac_remove)
- platform_set_drvdata() is only called after successful registration, so
emac_remove() only runs for fully registered devices
- unregister_netdev() is idempotent and safe to call on any registered device |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: Fix race between m2m job_abort and device_run
Fix kernel panic caused by race condition where v4l2_m2m_ctx_release()
frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run
with the same context.
Race sequence:
v4l2_m2m_try_run(): v4l2_m2m_ctx_release():
lock/unlock v4l2_m2m_cancel_job()
job_abort()
v4l2_m2m_job_finish()
kfree(m2m_ctx) <- frees ctx
device_run() <- use-after-free crash at 0x538
Crash trace:
Unable to handle kernel read from unreadable memory at virtual address
0000000000000538
v4l2_m2m_try_run+0x78/0x138
v4l2_m2m_device_run_work+0x14/0x20
The amphion vpu driver does not rely on the m2m framework's device_run
callback to perform encode/decode operations.
Fix the race by preventing m2m framework job scheduling entirely:
- Add job_ready callback returning 0 (no jobs ready for m2m framework)
- Remove job_abort callback to avoid the race condition |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
[ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI
[ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
[ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary)
[ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022
[ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding]
[ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6
04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00
[ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206
[ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e
[ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8
[ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8
[ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119
[ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810
[ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000
[ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0
[ 214.310347] Call Trace:
[ 214.313070] <IRQ>
[ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding]
[ 214.320975] bond_handle_frame+0x166/0xb60 [bonding]
[ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding]
[ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710
[ 214.339199] ? __pfx_arp_process+0x10/0x10
[ 214.343775] ? sched_balance_find_src_group+0x98/0x630
[ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10
[ 214.356513] ? arp_rcv+0x307/0x690
[ 214.360311] ? __pfx_arp_rcv+0x10/0x10
[ 214.364499] ? __lock_acquire+0x58c/0xbd0
[ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0
[ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 214.380743] ? lock_acquire+0x10b/0x140
[ 214.385026] process_backlog+0x3f1/0x13a0
[ 214.389502] ? process_backlog+0x3aa/0x13a0
[ 214.394174] __napi_poll.constprop.0+0x9f/0x370
[ 214.399233] net_rx_action+0x8c1/0xe60
[ 214.403423] ? __pfx_net_rx_action+0x10/0x10
[ 214.408193] ? lock_acquire.part.0+0xbd/0x260
[ 214.413058] ? sched_clock_cpu+0x6c/0x540
[ 214.417540] ? mark_held_locks+0x40/0x70
[ 214.421920] handle_softirqs+0x1fd/0x860
[ 214.426302] ? __pfx_handle_softirqs+0x10/0x10
[ 214.431264] ? __neigh_event_send+0x2d6/0xf50
[ 214.436131] do_softirq+0xb1/0xf0
[ 214.439830] </IRQ>
The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where
rlb_arp_recv() can race with rlb_deinitialize() and dereference
a freed rx_hashtbl entry.
Fix this by setting recv_probe to NULL and then calling
synchronize_net() to wait for any concurrent RX processing to finish.
This ensures that no RX handler can access rx_hashtbl after it is freed
in bond_alb_deinitialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbnic: close fw_log race between users and teardown
Fixes a theoretical race on fw_log between the teardown path and fw_log
write functions.
fw_log is written inside fbnic_fw_log_write() and can be reached from
the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before
IRQ/MBX teardown during cleanup, resulting in a potential data race of
dereferencing a freed/null variable.
Possible Interleaving Scenario:
CPU0: fbnic_fw_msix_intr() // Entry
fbnic_fw_log_write()
if (fbnic_fw_log_ready()) // true
... preempt ...
CPU1: fbnic_remove() // Entry
fbnic_fw_log_free()
vfree(log->data_start);
log->data_start = NULL;
CPU0: continues, walks log->entries or writes to log->data_start
The initialization also has an incorrect order problem, as the fw_log
is currently allocated after MBX setup during initialization.
Fix the problems by adjusting the synchronization order to put
initialization in place before the mailbox is enabled, and not cleared
until after the mailbox has been disabled. |
