| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section. |
| A vulnerability in the CLI of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges. To exploit this vulnerability, an attacker must have valid administrator-level credentials. |
| A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query. |
| Update: On November 5, 2025, Cisco became aware of a new attack variant against devices running Cisco Secure ASA Software or Cisco Secure FTD Software releases that are affected by CVE-2025-20333 and CVE-2025-20362. This attack can cause unpatched devices to unexpectedly reload, leading to denial of service (DoS) conditions. Cisco strongly recommends that all customers upgrade to the fixed software releases that are listed in the Fixed Software ["#fs"] section of this advisory.
A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to access restricted URL endpoints that are related to remote access VPN that should otherwise be inaccessible without authentication.
This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on a device. A successful exploit could allow the attacker to access a restricted URL without authentication. |
| A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS. |
| A vulnerability in the Internet Key Exchange version 2 (IKEv2) protocol processing of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient input validation when processing IKEv2 messages. An attacker could exploit this vulnerability by sending crafted IKEv2 traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition on the affected device. |
| A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload. |
| A vulnerability in the secure boot implementation of Cisco Secure Firewalls 3100 Series that are running Cisco Adaptive Security Appliance (ASA) Software or Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated attacker with physical access to the device to bypass the secure boot functionality.
This vulnerability is due to a logic error in the boot process. An attacker could exploit this vulnerability by injecting malicious code into a specific memory location during the boot process of an affected device. A successful exploit could allow the attacker to execute persistent code at boot time and break the chain of trust. |
| A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: This vulnerability will apply to approximately 5 percent of the RSA keys on a device that is running a vulnerable release of Cisco ASA Software or Cisco FTD Software; not all RSA keys are expected to be affected due to mathematical calculations applied to the RSA key. The RSA key could be valid but have specific characteristics that make it vulnerable to the potential leak of the RSA private key. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. See the Indicators of Compromise section for more information on the detection of this type of RSA key. The RSA key could be malformed and invalid. A malformed RSA key is not functional, and a TLS client connection to a device that is running Cisco ASA Software or Cisco FTD Software that uses the malformed RSA key will result in a TLS signature failure, which means a vulnerable software release created an invalid RSA signature that failed verification. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. |
| A vulnerability in ICMPv6 processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper processing of ICMPv6 messages. An attacker could exploit this vulnerability by sending crafted ICMPv6 messages to a targeted Cisco ASA or FTD system with IPv6 enabled. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the handling of the embryonic connection limits in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause incoming TCP SYN packets to be dropped incorrectly.
This vulnerability is due to improper handling of new, incoming TCP connections that are destined to management or data interfaces when the device is under a TCP SYN flood attack. An attacker could exploit this vulnerability by sending a crafted stream of traffic to an affected device. A successful exploit could allow the attacker to prevent all incoming TCP connections to the device from being established, including remote management access, Remote Access VPN (RAVPN) connections, and all network protocols that are TCP-based. This results in a denial of service (DoS) condition for affected features. |
| Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 Series devices 8.0 before 8.0(4)25 and 8.1 before 8.1(2)15, when an SSL VPN or ASDM access is configured, allows remote attackers to cause a denial of service (device reload) via a crafted (1) SSL or (2) HTTP packet. |
| Cisco PIX and ASA appliances with 7.0 through 8.0 software, and Cisco Firewall Services Module (FWSM) 3.1(5) and earlier, allow remote attackers to cause a denial of service (device reload) via a crafted MGCP packet, aka CSCsi90468 (appliance) and CSCsi00694 (FWSM). |
| Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.1(1) through 7.1(2)82, 7.2 before 7.2(4)27, 8.0 before 8.0(4)25, and 8.1 before 8.1(2)15, when AAA override-account-disable is entered in a general-attributes field, allow remote attackers to bypass authentication and establish a VPN session to an ASA device via unspecified vectors. |
| Memory leak in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 8.0 before 8.0(4) and 8.1 before 8.1(2) allows remote attackers to cause a denial of service (memory consumption) via an unspecified sequence of packets, related to the "initialization code for the hardware crypto accelerator." |
| Cisco Adaptive Security Appliance (ASA) running PIX 7.0 before 7.0.7.1, 7.1 before 7.1.2.61, 7.2 before 7.2.2.34, and 8.0 before 8.0.2.11, when AAA is enabled, composes %ASA-5-111008 messages from the "test aaa" command with cleartext passwords and sends them over the network to a remote syslog server or places them in a local logging buffer, which allows context-dependent attackers to obtain sensitive information. |
| Unspecified vulnerability in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.2(4)9 and 7.2(4)10 allows remote attackers to cause a denial of service (device reload) via a crafted IPv6 packet. |
| Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) 5500 devices 8.0(3)15, 8.0(3)16, 8.1(1)4, and 8.1(1)5, when configured as a clientless SSL VPN endpoint, allows remote attackers to obtain usernames and passwords via unknown vectors, aka Bug ID CSCsq45636. |
| Race condition in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)19, when using "clientless SSL VPNs," allows remote attackers to cause a denial of service (device reload) via "non-standard SSL sessions." |
