| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenVPN 2.5.0 through 2.7.6 on Windows using the tap-windows6 driver allows attackers to trigger an out-of-bounds write via crafted DOMAIN-SEARCH entries |
| This CVE ID has been rejected as a duplicate. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI
LabVIEW 2026 Q3 (26.3.0) and prior versions. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| Tobit Laboratories AG TeamDavid's Webbox application implements an API endpoint that is vulnerable to a
buffer overflow condition. By submitting a specially crafted JSON body,
such as one that is at least 8 characters long and begins with a number,
an unauthenticated attacker can cause the server to crash, resulting in
denial of service. Depending on the stack state or if a stack canary
can be disclosed through another vulnerability, this buffer overflow
could potentially lead to remote code execution and full compromise of
the server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application’s endpoint “//serverClient_close.html” is vulnerable to a
buffer overflow vulnerability in multiple form data parameters. By
submitting excessively long values in these parameters, an authenticated
attacker can trigger a server crash, resulting in denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application implements various file upload functionalities that are
vulnerable to a buffer overflow condition. By specifying an excessively
long filename in a file upload request, an unauthenticated attacker can
trigger a crash of the server, resulting in a denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Memory-safety vulnerability in github.com/jackc/pgx/v5. |
| ntop nDPI versions before 6.0 contain a heap buffer overflow vulnerability in the ndpi_json_string_escape function that writes beyond caller-supplied buffer boundaries. Attackers can trigger the overflow by supplying crafted network packet data including TLS SNI, HTTP headers, or DNS names that reach the vulnerable function, causing heap corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: use check_add_overflow for shader size+offset bound
vmw_shader_define() validates the user-supplied shader window against
its backing buffer with
(u64)buffer->tbo.base.size < (u64)size + (u64)offset
drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is
near U64_MAX the unsigned addition wraps and the resulting tiny value
passes the check. The unbounded offset is then stored in
res->guest_memory_offset and forwarded to host SVGA shader-create
commands.
Use check_add_overflow() to detect the wrap and compare the resulting
endpoint against the buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: seg6: clear IPv4 control block on IPIP decapsulation
End.DX4 and End.DT4 decapsulate an IPv4 packet through
decap_and_validate() and send it directly to IPv4 routing. The inner
packet therefore bypasses ip_rcv_core(), which normally clears IPCB
before IPv4 interprets skb->cb.
The skb instead retains IP6CB data from the outer packet. IP6CB and
IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps
IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and
ts.
The sender can make the stale optlen byte nonzero with a valid outer
extension-header chain. The reproducers put an eight-byte Destination
Options header immediately after the 40-byte IPv6 header and before the
Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled
Destination Options offset in both lastopt and nhoff, setting them to
40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees
optlen = 40 and rr = 40.
Both tcp_v4_save_options() and __ip_options_echo() skip option copying
when optlen is zero. Here optlen is 40, so the TCP SYN path allocates
room for 40 bytes of option data and calls __ip_options_echo(). The
stale rr value makes that function read inner packet byte 41 as the
Record Route option length. The reproducers set that sender-controlled
byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte
option-data area.
Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5
kernel both produced:
BUG: KASAN: slab-out-of-bounds in __ip_options_echo()
Write of size 255
The relevant End.DX4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dx4_finish
input_action_end_dx4
The relevant End.DT4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dt4
tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so
it does not appear as a separate frame.
When decap_and_validate() handles IPPROTO_IPIP, save the ingress
interface from IP6CB, clear IPCB, and restore the saved value. Doing
this in the common decapsulation path covers End.DX4, End.DT4, and
End.DT46's IPv4 arm.
Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after
l3mdev processing, which can replace skb_iif with the L3 master;
IP6CB iif still records the receiving interface set at IPv6 ingress. |
| MOOS ui-moos through 50b9c6c contains a buffer overflow vulnerability in ScopeTabPane.cpp and ScopeGrid.cpp where client and variable names are formatted into fixed 1024-byte buffers using sprintf without length validation. Attackers can supply arbitrarily long MOOS identifiers that overflow the buffers when an operator selects process list entries or pokes variables, enabling code execution. |
| MOOS-IvP through 24.8.1 contains multiple buffer overflow vulnerabilities in IvP function string decoders that trust attacker-controlled length fields without validation. Attackers can craft malicious encoded strings with mismatched declared and actual field lengths to overflow heap and stack buffers, potentially achieving remote code execution through MOOS variables or alog files. |
| There is an out-of-bounds write vulnerability in DASYLab due to improper validation of user-supplied data, resulting in a write past the end of an allocated data structure. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This issue affects all versions before 2026.0.0. |
| There is an out-of-bounds write vulnerability in DASYLab due to improper validation of user-supplied data, resulting in a write past the end of an allocated heap. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This issue affects all versions before 2026.0.0. |
| There is an out-of-bounds write vulnerability in DASYLab due to lack of proper validation of user-supplied data. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This issue affects all versions before 2026.0.0. |
