| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-51 and 7.1.2-26, when providing invalid arguments to the connected-components option an infinite loop will occur. This issue has been fixed in versions 6.9.13-51 and 7.1.2-26. |
| A flaw exists within the Linux kernel's handling of new TCP connections. The issue results from the lack of memory release after its effective lifetime. This vulnerability allows an unauthenticated attacker to create a denial of service condition on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Remove overflows on the invalidation path
Since RISC-V supports a sign extended page table it should support
a gather->end of ULONG_MAX, but if this happens it will infinite loop
because of the overflow.
Also avoid overflow computing the length by moving the +1 to the other
side of the < |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Infinite loop via the bnModInverse function in ext/jsbn2.js when the BigInteger.modInverse implementation receives zero or negative inputs, allowing an attacker to hang the process permanently by supplying such crafted values (e.g., modInverse(0, m) or modInverse(-1, m)). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: stop hash:* range iteration at end
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary. |
| image-size through 2.0.2 contains a denial of service vulnerability that allows remote attackers to permanently block the Node.js event loop by supplying a specially crafted image buffer with a zero-valued size field in a recognized box-type. Attackers can trigger an infinite loop in the JXL or HEIF image parsers by providing a crafted image containing a box with a size of zero, causing the offset to never advance and permanently hanging the application. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.0, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with outlines into a writer. This vulnerability is fixed in 6.13.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.0, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires extracting the text in layout mode. This vulnerability is fixed in 6.13.0. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23, a Denial of Service (DoS) vulnerability exists in the @angular/common package of Angular. The formatNumber function, which is also utilized by DecimalPipe, PercentPipe, and CurrencyPipe, does not properly validate the upper bounds of the digitsInfo parameter. Specifically, the minimum and maximum fraction digits parsed from the digitsInfo string (e.g., 1.2-4) are converted to integers and used without limits. When parsing a maliciously crafted digitsInfo string with excessively large fraction digit values (e.g., 1.200000000-200000000), the internal roundNumber function attempts to pad the digits array to match the requested fraction size. This results in an unbounded loop that repeatedly pushes elements into an array. This vulnerability is fixed in 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.12.2, an attacker who uses this vulnerability can craft a PDF which leads to large memory usage. This requires extracting the text of a page which contains a form XObject with self-references. This vulnerability is fixed in 6.12.2. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.13.1, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires merging a file with threads/articles into a writer. This vulnerability is fixed in 6.13.1. |
| pam_usb provides hardware authentication for Linux using removable media. In pam_usb 0.9.1 and earlier, usb_get_process_parent_id() can cause an infinite loop DoS because it does not initialize *ppid on failure. In pusb_local_login(), the same variable is reused as input and output in a process-tree while loop; if /proc/<pid>/stat cannot be read (for example, when an ancestor process exits during authentication), the PID is not updated and the loop does not terminate. This hangs the authenticating process (such as sudo, sshd, or login) until it is forcibly terminated. This issue has been fixed in version 0.9.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector. |
| libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix soft lockup in retry_aligned_read()
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix IO hang with degraded array with llbitmap
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled. |
