Search
Search Results (13 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80975 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: qnap-mcu: keep the reply buffer alive past a command timeout qnap_mcu_exec() publishes an on-stack buffer to the receive path: unsigned char rx[QNAP_MCU_RX_BUFFER_SIZE]; ... reply->data = rx; reply->length = length; and qnap_mcu_receive_buf() writes into it from the serdev receive path, which runs out of flush_to_ldisc() and is not serialized against qnap_mcu_exec() at all. bus_lock cannot cover it, because qnap_mcu_exec() holds that mutex across wait_for_completion_timeout(). On a timeout qnap_mcu_exec() returns with reply->data still pointing at its own frame. A reply that arrives late, or an unsolicited message from the MCU, is then written into a stack frame that has been left, corrupting whatever runs next on that stack. The same applies when qnap_mcu_write() fails, since that path returns without touching the reply state either. Move the receive buffer into struct qnap_mcu. It is 37 bytes and the structure is devm_kzalloc()ed, so it lives as long as the driver, and a late write lands in memory that is still valid and is reinitialized by the next command. bus_lock keeps commands from sharing it. This deliberately does not clear reply->data or reply->length on the timeout path. Doing so races with qnap_mcu_receive_buf(), which reads both after its if (!reply->length) return size; check: clearing reply->data gives a NULL dereference, and clearing reply->length alone removes the reply->received == reply->length exit condition, so the copy loop runs until the uart chunk is consumed and overruns the buffer. Leaving both set keeps the write bounded by reply->length, which qnap_mcu_exec() has already checked against sizeof(mcu->rx). | ||||
| CVE-2026-64397 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize QUERY_DIRECTORY requests per file smb2_query_dir() stores a pointer to its stack-allocated private data in the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the same file handle can overwrite this pointer while an iterate_dir() callback is still using it, resulting in a stack use-after-free. Add a per-file mutex and hold it while accessing the shared directory enumeration state. The lock covers scan restart, dot entry state, readdir_data setup and iteration, and response construction. This prevents another request from replacing readdir_data.private before the current request has finished using it and also serializes the shared file position. | ||||
| CVE-2026-72433 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak This needs to test for nonzero retval. | ||||
| CVE-2026-3591 | 1 Isc | 1 Bind | 2026-05-21 | 5.4 Medium |
| A use-after-return vulnerability exists in the `named` server when handling DNS queries signed with SIG(0). Using a specially-crafted DNS request, an attacker may be able to cause an ACL to improperly (mis)match an IP address. In a default-allow ACL (denying only specific IP addresses), this may lead to unauthorized access. Default-deny ACLs should fail-secure. This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1. BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected. | ||||
| CVE-2026-26399 | 1 Stm32duino | 1 Arduino Core Stm32 | 2026-04-28 | 5.3 Medium |
| A stack-use-after-return issue exists in the Arduino_Core_STM32 library prior to version 1.7.0. The pwm_start() function allocates a TIM_HandleTypeDef structure on the stack and passes its address to HAL initialization routines, where it is stored in a global timer handle registry. After the function returns, interrupt service routines may dereference this dangling pointer, resulting in memory corruption. | ||||
| CVE-2026-34553 | 2 Color, Internationalcolorconsortium | 2 Iccdev, Iccdev | 2026-04-20 | 4 Medium |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, there is a defect in LUT dump/iteration logic affecting CIccCLUT::Iterate() and output produced by CIccMBB::Describe() (via CLUT dumping). This issue has been patched in version 2.3.1.6. | ||||
| CVE-2024-4418 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Rhel Eus | 2026-04-15 | 6.2 Medium |
| A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it. | ||||
| CVE-2023-52482 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-11-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/srso: Add SRSO mitigation for Hygon processors Add mitigation for the speculative return stack overflow vulnerability which exists on Hygon processors too. | ||||
| CVE-2024-33045 | 1 Qualcomm | 385 Ar8035, Ar8035 Firmware, Csra6620 and 382 more | 2025-08-11 | 8.4 High |
| Memory corruption when BTFM client sends new messages over Slimbus to ADSP. | ||||
| CVE-2022-41837 | 2 Debian, Openimageio | 2 Debian Linux, Openimageio | 2025-04-15 | 9.8 Critical |
| An out-of-bounds write vulnerability exists in the OpenImageIO::add_exif_item_to_spec functionality of OpenImageIO Project OpenImageIO v2.4.4.2. Specially-crafted exif metadata can lead to stack-based memory corruption. An attacker can provide a malicious file to trigger this vulnerability. | ||||
| CVE-2021-23555 | 2 Redhat, Vm2 Project | 2 Acm, Vm2 | 2024-11-21 | 9.8 Critical |
| The package vm2 before 3.9.6 are vulnerable to Sandbox Bypass via direct access to host error objects generated by node internals during generation of a stacktraces, which can lead to execution of arbitrary code on the host machine. | ||||
| CVE-2021-21798 | 1 Gonitro | 1 Nitro Pro | 2024-11-21 | 7.8 High |
| An exploitable return of stack variable address vulnerability exists in the JavaScript implementation of Nitro Pro PDF. A specially crafted document can cause a stack variable to go out of scope, resulting in the application dereferencing a stale pointer. This can lead to code execution under the context of the application. An attacker can convince a user to open a document to trigger the vulnerability. | ||||
| CVE-2020-21686 | 1 Nasm | 1 Netwide Assembler | 2024-11-21 | 5.5 Medium |
| A stack-use-after-scope issue discovered in expand_mmac_params function in preproc.c in nasm before 2.15.04 allows remote attackers to cause a denial of service via crafted asm file. | ||||
Page 1 of 1.