Export limit exceeded: 10242 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10242 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-81954 | 1 Microsoft | 18 365, 365 Apps, Excel and 15 more | 2026-09-12 | 7.8 High |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-89522 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: staging/ipu7: fix async notifier UAF on probe error path isys_register_devices() registers the V4L2 async notifier via isys_notifier_init(). If a subsequent probe step such as isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label which only calls isys_unregister_devices(). That helper tears down the video devices, subdevices, V4L2 device and media device, but never unregisters or cleans up the async notifier. As a result the notifier stays chained in the global notifier_list while the enclosing struct ipu7_isys is freed by devres, leading to list corruption and a use-after-free the next time the list is walked. The remove path already does the right thing by calling isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on the probe error path so the notifier is unregistered and cleaned up before the device is torn down. | ||||
| CVE-2026-89523 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregistered within that window, the pending work can still run and access vif/bss data that may already be freed, or send MCU commands while the firmware is not available. Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown and suspend paths: - mt7925_mac_reset_work() (chip reset recovery) - mt7925e_unregister_device() (PCIe unbind) - mt7925_pci_suspend() (PCIe bus suspend) - mt7925_suspend() (mac80211 suspend) - mt7925u_suspend() (USB bus / runtime suspend) This ensures the work is stopped before the device state becomes invalid. | ||||
| CVE-2026-89474 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: drain usb_work before freeing the charger The USB-PHY notifier queues usb_work, whose handler calls power_supply_changed(bq->charger). The reset devm action only unregisters the notifier and was registered before the power supplies, so devm frees bq->charger on unwind before the action runs; a usb_work still queued can then dereference it. Register the reset action after the power supplies, so it unregisters the notifiers and drains usb_work before the supplies are released. Initialize usb_work and obtain the PHY references before registering the notifiers, so the worker cannot run before the supplies exist. Found by static analysis. | ||||
| CVE-2026-89641 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size() When the else branch of cifs_file_set_size() finds a writable file handle via find_writable_file(), it borrows tcon and server from the handle's tlink, attempts the handle-based set_file_size() RPC, and then releases the handle with cifsFileInfo_put(). If set_file_size() fails, execution falls through to the path-based fallback, which reuses the borrowed tcon and server under the "if (tcon == NULL)" guard. Since tcon is not NULL at that point, the guard is skipped. If cifsFileInfo_put() dropped the last reference on a tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE cleared, as happens during reconnection or session teardown), cifs_put_tlink() will have freed tcon; the subsequent set_path_size() call is then a use-after-free. Setting tcon = NULL after cifsFileInfo_put() causes the existing guard to take the cifs_sb_tlink() path, which acquires a fresh reference for the path-based operation or fails cleanly if the session is gone. | ||||
| CVE-2026-89740 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[] before uart_add_one_port() because console setup uses the table. The entry is not cleared when adding the port fails or after removal, leaving a dangling pointer. A sibling probe can register the shared console through that stale entry. This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a sibling UART, unbinding the console UART and rebinding the sibling. Keep the entry valid through uart_remove_one_port(), then clear it. Protect port addition and removal together with their table updates so sibling operations cannot interleave. Reject an occupied slot rather than clobbering an active port during a duplicate-line probe. | ||||
| CVE-2026-89487 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive. | ||||
| CVE-2026-89488 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix CT limit teardown use-after-free Packet processing uses CT limit state under RCU, while netns teardown frees that state under ovs_mutex. The CT limit pointer was neither removed from readers nor protected by a grace period, allowing packet processing to dereference the freed state. An unprivileged user can trigger this bug from a user and network namespace, causing a slab-use-after-free in ovs_ct_execute() when the netns is torn down. Publish the CT limit pointer through RCU, remove it before teardown, and wait for readers before freeing its contents. Keep ovs_mutex around individual CT limit updates, and use the RCU read-side lock while GET traverses the RCU-protected limit lists. Netns teardown detaches the RCU-protected CT limit state in the pernet .pre_exit callback while holding ovs_mutex. The pernet core guarantees an RCU grace period between the .pre_exit and .exit callbacks, so the .exit callback completes the teardown without adding any extra synchronization. The netlink command handlers do not need NULL checks because the userspace netlink socket holds an active reference to its network namespace while a request is processed. The per-netns exit path therefore cannot run concurrently with SET, DEL, or GET for that socket's namespace. | ||||
| CVE-2026-89570 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/mce: Make the MCE notifier per-region Flavien Solt reported lifetime issues with the CXL MCE notifier, which can lead to NULL dereferences and use-after-free in the MCE handler. The notifier was registered per memory device and stored in 'struct cxl_memdev_state', even though it only needs the region state (the region's SPA range and its extended linear cache size). Instead of keeping the memory device and endpoint alive, the correct fix is to move the notifier into 'struct cxl_region' and register it from cxl_region_probe() as it should be a per-region notifier. Setup the registration to only happen for regions that have an extended linear cache as that is the only current usage. Remove cxl_port_get_spa_cache_alias() as it is now dead code. [ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ] | ||||
| CVE-2026-89703 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked delegations but does not set SC_STATUS_FREED before releasing cl_lock. revoke_delegation() uses this flag to detect whether FREE_STATEID has already processed the delegation -- without it, the freed delegation is added to cl_revoked via list_add(), producing a use-after-free when cl_revoked is later traversed in __destroy_client(). The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already sets SC_STATUS_FREED correctly. Apply the same pattern to the SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid(). | ||||
| CVE-2026-89535 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id svc_rdma_free() caches rdma->sc_cm_id->device before teardown, then calls rdma_destroy_id(sc_cm_id) which frees the cm_id. rpcrdma_rn_unregister() follows, but between those two calls the transport's sc_rn entry is still installed in the device's rd_xa. A concurrent ib_unregister_device walk can dispatch svc_rdma_xprt_done() against the now-freed sc_cm_id. Move rpcrdma_rn_unregister() before rdma_destroy_id() so the transport's notification entry is removed from the xarray before the cm_id it references is destroyed. Also guard the sc_cm_id dereference with a NULL check: the following patches introduce paths that reach svc_rdma_free() with sc_cm_id == NULL (listener create failure, ADDR_CHANGE replacement failure). | ||||
| CVE-2026-89637 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers. | ||||
| CVE-2026-89677 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix possible fh_compose of wrong dentry in nfsd4_create_file() dentry_create() can hypothetically provide a different dentry than the one passed in. This could happen, for example, if the exported filesystem is NFS, and the server returned to OPEN a filehandle which matched a directory that was already in the dcache. Clearly this would not be expected! If this were to happen the dentry (child) that was already stored in resfhp could be freed and later dereferenced. We shouldn't call fh_compose() until we are certain that we have the final dentry, so this patch moved the fh_compose() call to two places: one for the case where the target already exists, and one after dentry_create() where it was created. | ||||
| CVE-2026-89739 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.ep_list) | dwc3_debugfs_remove_endpoint_dir(dep) | kfree(dep) | // dep is freed | | dwc3_nostream_work | // use dep (use-after-free) Fix it by canceling the delayed work before kfree(dep) in dwc3_gadget_free_endpoints. | ||||
| CVE-2026-89741 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not really a good way of fixing this without breaking video_register_device() into two parts, one that initializes everything, and one that does the actual device_register, and then converting all V4L2 drivers to this new model. That is a massive job, and it is very unlikely that device_register will fail. So rather than ending up in a double-free scenario, just revert this patch, and in that case we'll have a small memory leak. Which is a lot more robust. | ||||
| CVE-2026-89708 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown After a DESTROY_SESSION the per-session teardown path can free a session while rpciod still holds an inflight callback rpc_task that dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes cl_callback_wq, but once nfsd4_run_cb_work() has called rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue does not wait for it. rpc_shutdown_client() does drain rpciod tasks, but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay() (e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain. destroy path rpciod ------------ ------ unhash_session(ses) nfsd4_probe_callback_sync(clp) flush_workqueue(cl_callback_wq) /* returns; rpc_task still live */ nfsd4_put_session_locked(ses) free_session(ses) -> kfree(ses) nfsd4_cb_sequence_done() reads cb_clp->cl_cb_session /* freed slab */ A second window exists in nfsd4_process_cb_update(). When __nfsd4_find_backchannel() returns NULL because unhash_session() has already removed the destroyed session from cl_sessions, setup_callback_client() takes the v4.1 early return so clp->cl_cb_session = ses never fires and the field retains a pointer to the about-to-be-freed session. Fix both by converting cl_cb_session to an RCU-protected pointer: - Move the cl_cb_session = ses assignment in setup_callback_client() to after rpc_create() succeeds, so it is only published when a working backchannel exists. Clear cl_cb_session on the error return in nfsd4_process_cb_update(). Both stores use rcu_assign_pointer(). - Annotate cl_cb_session with __rcu. All rpciod-side readers use rcu_read_lock()/rcu_dereference() and check for NULL, bailing to the appropriate error or requeue path: encode_cb_sequence4args(), decode_cb_sequence4resok(), nfsd41_cb_get_slot(), nfsd41_cb_release_slot(), nfsd4_cb_prepare(), and nfsd4_cb_sequence_done(). - Switch __free_session() from kfree() to kfree_rcu() so the session slab is not reclaimed until after an RCU grace period, guaranteeing that rpciod readers inside rcu_read_lock() never dereference freed memory. - Pass the session pointer to the nfsd_cb_seq_status and nfsd_cb_free_slot tracepoints instead of having them re-read cl_cb_session. - nfsd4_cb_prepare() calls rpc_exit() when the session is NULL, routing through the done/release path to requeue the callback. | ||||
| CVE-2026-89762 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix cred UAF caused by begin_current_label_crit_section() AppArmor's begin_current_label_crit_section() is a scary function called from lots of LSM hooks (in particular VFS/socket-related ones) that checks if the label referenced by the current creds is marked FLAG_STALE, and if so, attempts to use aa_replace_current_label() to replace the creds with an updated version that uses a new label. The first problem with this is that it would directly lead to UAF of `struct cred` if anything in the kernel takes a pointer to the current creds and accesses these past a security hook invocation that replaces creds, like so: ``` const struct cred *cred = current_cred(); alloc_file_pseudo(...); uid_t uid = cred->euid; ``` I don't know if anything in the kernel actually does this, but I think it is very surprising that this pattern could lead to UAF. The second problem is that things go wrong when aa_replace_current_label() runs with overridden credentials. aa_replace_current_label() bails out if `current_cred() != current_real_cred()` (mirroring the check in proc_pid_attr_write()), but this check can't actually reliably detect overridden credentials because the overridden creds can be the same as the objective creds. So in approximately the following scenario, things go wrong: 1. task begins with <creds A> (as both objective and subjective creds), with refcount=2 2. task grabs an extra reference on <creds A> for overriding 3. task calls override_creds(<creds A>), which returns a pointer to the old subjective creds (<creds A>) 4. task enters AppArmor LSM hook 5. AppArmor checks that objective/subjective creds are equal 6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on <creds A> 7. task leaves AppArmor LSM hook 8. task calls revert_creds(<creds A>) 9. now task->cred is <creds A> while task->real_cred is <creds B>, but the task_struct logically holds two references to <creds B> 10. another task drops the extra reference on <creds A> that was used for overriding, refcount drops to 0 11. now task->real_cred points to freed creds At this point, any access to current_cred() will be UAF. I have a test case where I run aa-disable on a profile while a process using that profile is blocked on splice() from a FUSE passthrough file into a full pipe; after the profile update, the pipe becomes empty, splice() resumes, the credentials go out of sync, and a subsequent getuid() syscall results in a KASAN UAF splat. To fix this, instead of directly replacing creds, do it via task_work that will run at the end of the current syscall. (The point in time at which the cred replacement happens should have no correctness impact; it is just a performance optimization to avoid unnecessarily touching the refcount of the new label.) Note that AppArmor still performs direct cred replacements in the sb_pivotroot LSM hook after this change, and that direct cred replacements can still happen in VFS ->write() callbacks via proc_pid_attr_write(). There are two options for what to do with aa_dup_task_ctx(): Either explicitly reset new->label_replacement_pending after the entire aa_task_ctx has been copied, or switch to manually copying members over. I am switching to manually copying members over because that should make bugs more obvious. | ||||
| CVE-2026-89764 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust: devres: fix race between concurrent revokers There is a potential race condition when two paths try to revoke a Devres concurrently. The driver core's devres_release_all() calls Revocable::revoke() via the release callback, while Devres::drop() calls revoke_nosync() on another CPU. The revoker that does not claim the is_available swap returns immediately, but the revoker that did may still be executing drop_in_place() on the inner data. This can cause a use-after-free when the other revoker's caller proceeds to drop adjacent resources that drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with SGTable freeing the backing sg_table and pages). Fix this by adding a Completion. The release callback signals the Completion after revoke() finishes, and Devres::drop() waits for it when it loses the is_available swap. This ensures the wrapped object is fully torn down before Devres::drop() returns. | ||||
| CVE-2026-89635 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: only rebind the reopened file's own oplock on durable reconnect ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every detached oplock to the reconnecting session: list_for_each_entry_rcu(op, &ci->m_op_list, op_entry, lockdep_is_held(&ci->m_lock)) { if (op->conn) continue; op->conn = ksmbd_conn_get(fp->conn); op->sess = work->sess; } The only key is op->conn == NULL, which every detached durable handle on that inode matches, not just the one owned by fp. When two sessions hold durable handles on the same file and both disconnect, reconnecting one of them adopts the other session's oplock: op->sess is overwritten with the reconnecting session without taking a reference on it, while op->conn pins the connection. The sibling teardown path, session_fd_check(), keys on the identity of the connection being torn down (op->conn == conn) rather than on shared state, and so does not have this problem. Once the adopting session is destroyed, ksmbd_session_destroy() frees it while the foreign oplock still points at it. The reader in ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is still live thanks to the reference taken above, and then dereferences the stale session: if (!opinfo->conn) { up_read(&fp->f_ci->m_lock); goto out; } ft = &opinfo->sess->file_table; write_lock(&ft->lock); BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0 Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: _raw_write_lock+0x74/0xd0 ksmbd_close_fd_app_instance_id+0x183/0x410 smb2_open+0x1346/0x4430 handle_ksmbd_work+0x2bb/0x7b0 Reached from an authenticated session against a share with the default durable-handle and oplock configuration: two sessions open the same file with a durable-v2 handle and an RH lease under distinct AppInstanceIds, both log off, one reconnects with DH2C, and a later durable-v2 create carrying the other AppInstanceId walks into the freed session. Constrain the loop to the oplock owned by the file being reopened. | ||||
| CVE-2026-89662 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent lock owner use-after-free during client teardown __destroy_client() releases a client's open owners, but a lock owner whose only reference is a blocked lock (nbl) stays on cl_ownerstr_hashtbl. client_has_state() does not count a bare owner, so DESTROY_CLIENTID can reach __destroy_client() with such owners present. __destroy_client() then walks the table, calling remove_blocked_locks() on each owner without a reference. Freeing a blocked lock drops the owner reference held via flc_owner. The per-net laundromat reaps blocked locks from nn->blocked_locks_lru independently of client state. The two paths share blocked_locks_lock only for the list splice, not the owner's lifetime. The laundromat therefore frees the owner as __destroy_client() dereferences it, a NULL dereference in remove_blocked_locks(). nfsd4_release_lockowner() holds a reference across the same call; __destroy_client() does not. Hold cl_lock across the walk, taking a reference and unhashing each owner, then drop it before remove_blocked_locks() and nfs4_put_stateowner(), which take blocked_locks_lock and cl_lock. | ||||