Export limit exceeded: 390715 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390715 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89749 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). | ||||
| CVE-2026-89172 | 2026-09-12 | N/A | ||
| Improper protection of physical side channels vulnerability in Microchip AN1044, Microchip AN953, and Microchip SW300052. This issue affects AN1044: through A; AN953: through A; SW300052: through 2.6. | ||||
| CVE-2026-89615 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound page_lcns[] index by the log record The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i, where i runs up to the log record's lcns_follow. That count is checked only against the record's own length, not the target entry, so check_dp_table() (which validates the entry's lcns_follow) does not cover it: the copy_lcns entry may even be freshly allocated after that check, and find_dp() bounds j but not i. A crafted record thus overflows page_lcns[] of an otherwise valid entry. Add dp_range_ok() and reject, before each loop, any record whose run does not fit the entry. These are the only two page_lcns[] accesses indexed by the record rather than the entry, so together with the entry validation every access is now bounded. [[email protected]: original patch contained changes to the problem already handled, applied partly] | ||||
| CVE-2026-89619 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer quickspi_hid_raw_request() receives the caller's buffer length in len, but quickspi_get_report() never sees it and copies the whole device-supplied response into buf regardless: memcpy(buf, qsdev->report_buf, qsdev->report_len); qsdev->report_len comes from the input report the touch controller returns, while buf is sized to whatever the caller asked hidraw for through HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf with device-controlled content. The intel-quicki2c sibling already passes the caller length down to quicki2c_get_report() and validates the response against it before the copy. Do the same here. | ||||
| CVE-2026-89621 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: validate report size in mcp2221_raw_event() mcp2221_raw_event() never validates the size of incoming HID reports. In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3] as the copy length without checking that 4 + data[3] bytes actually exist in the received report. A malicious or misbehaving USB device can send a short report with a large data[3], causing the memcpy to read past the valid report data in the HID transfer buffer and leak uninitialized kernel memory back to userspace through the I2C/SMBus read path. Add a minimum size check at entry and validate that the source range fits within the received report before the copy. | ||||
| CVE-2026-89629 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Check size of status and firmware events before reading them Malformed status and firmware events could cause an out-of-bounds read since the size wasn't being checked. Check the size and warn on unexpected values to avoid this. | ||||
| CVE-2026-89637 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers. | ||||
| CVE-2026-89639 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cifs: use cifs_invalidate_cache() in cifs_do_truncate() for O_TRUNC cifs_do_truncate() is invoked from cifs_open() without i_rwsem, so it cannot use cifs_resize_file_locked() to perform a proper fscache cookie resize. Instead, add cifs_invalidate_cache() after cifs_setsize(). cifs_invalidate_cache() calls fscache_invalidate(), which works without holding i_rwsem: it unconditionally increments inval_counter and sets FSCACHE_COOKIE_NO_DATA_TO_READ, ensuring that stale cached data is not served once the cookie is later activated by fscache_use_cookie(). Truncation to zero leaves no valid cached data, making invalidation the correct semantic here. | ||||
| CVE-2026-89640 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep(). | ||||
| CVE-2026-89653 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode MDSMap export_targets entries are monitor controlled. check_new_map() uses each entry as a bit number in a fixed stack bitmap, so a rank outside the protocol namespace can make set_bit() write past the end of the array. Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not validate against possible_max_rank here because maps may legitimately reference ranks beyond a temporarily reduced max_mds. | ||||
| CVE-2026-89692 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clear CALLBACK_RUNNING on failed delegation recall queue nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit at entry to serialize recall work, then calls nfsd4_run_cb() to queue the recall. When the queue attempt fails the refcount bump is undone, but the RUNNING bit is left set. The only site that clears the bit is nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the workqueue and is therefore unreachable when nothing was queued. The bit becomes a permanent latch on dp->dl_recall.cb_flags: every subsequent break_lease() on the same delegation hits the early-return guard in nfsd_break_one_deleg() and silently skips the recall, so the delegation is never broken and the conflicting open or lock stalls. Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside the refcount_dec. | ||||
| CVE-2026-89695 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: cap decoded POSIX ACL count to bound sort cost nfsd4_decode_posixacl() reads a u32 entry count off the wire and passes it straight to posix_acl_alloc() and sort_pacl_range(). The latter is an O(n^2) bubble sort, so a client-chosen count drives unbounded CPU in the server's compound processing path. nfsd4_decode_posixacl() xdr_stream_decode_u32(&count) /* uncapped u32 */ posix_acl_alloc(count, GFP_KERNEL) sort_pacl_range(*acl, 0, count - 1) /* O(n^2) bubble sort */ The encoder side in the same file already rejects ACLs whose a_count exceeds NFS_ACL_MAX_ENTRIES, but the decoder introduced in commit 5fc51dfc2eb1 ("NFSD: Add support for XDR decoding POSIX draft ACLs") omitted the symmetric check. Fix by rejecting a wire count greater than NFS_ACL_MAX_ENTRIES with nfserr_inval, before any allocation, so the sort is bounded by NFS_ACL_MAX_ENTRIES^2 comparisons. While we're in here, also fix the nfserr_resource return if posix_acl_alloc() fails. That's not a legal error code for v4.1+. Change it to return nfserr_jukebox as that's more appropriate for memory allocation failures. | ||||
| CVE-2026-89702 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: size fh_verify server sockaddr slot by xpt_locallen The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the server sockaddr slot sized by xpt_remotelen but fill it from xpt_local using xpt_locallen: TP_STRUCT__entry( ... __sockaddr(server, rqstp->rq_xprt->xpt_remotelen) ... ) TP_fast_assign( ... __assign_sockaddr(server, &rqstp->rq_xprt->xpt_local, rqstp->rq_xprt->xpt_locallen); ... ) When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy writes past the reserved ring-buffer slot. In the reverse direction (xpt_locallen < xpt_remotelen) the slot is oversized and the unwritten tail leaks prior ring-buffer contents to trace consumers. The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote() is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from the RDMA connect path; svc_create_socket() for UDP calls only svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request then copies 16 or 28 bytes from xpt_local into a zero-byte slot. The other NFSD tracepoints that record the server address (NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS, SVC_RQST_ENDPOINT_FIELDS) already size the server slot by xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only exceptions. Fix by sizing the server slot with xpt_locallen so the declared slot matches the copy length. The client slot and its assignment already agree on xpt_remotelen and are left untouched. | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-90450 | 2026-09-12 | N/A | ||
| The application's role-authorization lookup defaults to granting access when a request handler's name is not present in its table of role requirements, rather than defaulting to deny. Any request handler that is not explicitly registered in this table is reachable by any authenticated user regardless of their assigned role, and any newly added handler is fail-open by default until explicitly added to the table. | ||||
| CVE-2026-90453 | 2026-09-12 | N/A | ||
| A file-upload handler redirects the authenticated client's browser to a URL taken directly from that same request's Referer header, without validating it against the application's own origin. This allows an authenticated attacker to craft a request that causes another user's browser to be redirected to an arbitrary external destination after completing an upload. | ||||
| CVE-2026-84023 | 2026-09-12 | N/A | ||
| The BEAR WordPress plugin before 1.2.2 does not verify a CSRF nonce or check user capabilities before updating taxonomy terms, allowing an attacker to modify arbitrary terms by tricking a logged-in privileged user into visiting a crafted page. | ||||
| CVE-2026-87891 | 2026-09-12 | N/A | ||
| The Rox Appointment Booking WordPress plugin before 1.2.0 does not perform any capability or authorization check when saving its holiday schedule, allowing unauthenticated attackers to overwrite the dates the booking system treats as unavailable, which can block legitimate bookings or open dates the site owner intended to keep closed. | ||||
| CVE-2026-87918 | 2026-09-12 | N/A | ||
| The WPBot WordPress plugin before 8.5.7 does not perform any authorization or nonce check on several AJAX actions that relay prompts to its configured AI providers, allowing unauthenticated attackers to make those third-party API calls, and consume the associated cost, using the site's own configured API keys. | ||||
| CVE-2026-89731 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from the RCRB MMIO block using a readl() loop bounded by sizeof(struct aer_capability_regs). This struct is a software layout and its embedded struct pcie_tlp_log is larger than the on-wire AER capability. As a result the loop reads past the mapped AER register block. The over-read also populates the software-only tail fields including header_log.header_len. An out-of-range header_len passed to pcie_print_tlp_log() can then loop past the header log buffer and cause a second out-of-bounds read. The read was correct when introduced, but struct pcie_tlp_log has since grown (Header Log and TLP Prefix Log sizes, header_len and flit fields), so sizeof(struct aer_capability_regs) no longer matches the physical AER capability. Bound the read to the physical AER registers, header through the 16 byte Header Log. Zero the destination first so the software-only fields are deterministic. | ||||