Export limit exceeded: 22563 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22563 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80945 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - unmap dst before software fallback on decompress On a hardware analytics error, decompress retries through the software fallback, which writes req->dst with the CPU while it is still mapped DMA_FROM_DEVICE. With SWIOTLB active the later dma_unmap_sg() copies the stale bounce buffer over req->dst, corrupting the result. Unmap before the fallback runs. The async path unmaps inline; the sync path signals the retry with -EAGAIN so iaa_comp_adecompress() runs the fallback after unmapping. | ||||
| CVE-2026-80944 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Detach sync cmd buffer on interrupted wait mwifiex synchronous commands keep the caller-provided data buffer in cmd_node->data_buf. Several callers pass stack-allocated objects there. If wait_event_interruptible_timeout() is interrupted, the caller can return and release that stack object while the firmware command is still the current command. A late firmware response then reaches the normal response handler, which can copy data through cmd_node->data_buf into the stale stack address. This fixes a stack corruption observed during repeated association and disassociation cycles. The panic trace showed the command wait being interrupted immediately before a bad pointer dereference: cmd_wait_q terminated: -512 Unable to handle kernel paging request at virtual address 002c583837384662 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted ... Tainted: [M]=MACHINE_CHECK The fault address decodes as little-endian ASCII: 0x002c583837384662 -> "bF878X,\0" which is a fragment of the VERSION_EXT firmware string exposed as debugfs "verext": w8997o-V4, RF878X, FP92, 16.92.21.p153.7 The same runs also showed corrupted control data containing: 0x2400372e333531 -> "153.7\0$" which is the tail of the same VERSION_EXT string. This points at a late VERSION_EXT response writing through a stale stack-backed data_buf after the interrupted wait returned. After cancelling pending commands on an interrupted or timed-out wait, detach the caller-owned data buffer from the still-current command. This preserves the existing command cancellation behaviour while preventing a late response from writing through a pointer whose lifetime ended with the waiting caller. Tested on an i.MX8MP board using an 88W8997. | ||||
| CVE-2026-80943 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID from the 802.11 header and then uses it as an index into sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID value, so the result can be in the range 0..15. rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the aggregation state array. Keep the default RTL_AGG_STOP state for out-of-range TIDs, matching rtl92cu_tx_fill_desc(). This issue was detected by our static analysis tool and confirmed by manual audit. UBSAN validation for the same bug pattern reports an array-index-out-of-bounds access with index 10 for type 'rtl_tid_data [9]'. | ||||
| CVE-2026-80935 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block copy from the address reported by the MCU response (event->addr, a device-controlled __le32) and clamps only the copy length, never the destination offset into dev->mt76.eeprom.data. A malicious or malfunctioning device can report an arbitrary address and drive an out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-78547 | 2026-09-11 | N/A | ||
| Out-of-bounds write vulnerability in Citrix Citrix Workspace app for Windows. This issue affects Citrix Workspace app for Windows: before 2603.11 Current Release (CR), before 2507.1 LTSR CU3, and before LTSR 2607. | ||||
| CVE-2026-73694 | 1 Filerun | 1 Filerun | 2026-09-11 | 7.2 High |
| FileRun before 2026.3.0 contains an OS command injection vulnerability caused by a no-op redefinition of escapeshellcmd() in CLI.php that strips shell-metacharacter escaping, allowing attacker-controlled input to reach an exec() sink unsanitized. Attackers can exploit this through an interactive path via image_preview.php with a crafted args parameter requiring superuser authentication, or through a persistent path by storing malicious payloads in thumbnails_ffmpeg_args or thumbnails_ffmpeg_ss that execute when any user triggers video thumbnail generation. | ||||
| CVE-2026-18888 | 1 Mongodb | 1 Bi Connector Odbc Driver | 2026-09-11 | 6.5 Medium |
| The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. | ||||
| CVE-2026-82005 | 3 Adobe, Apple, Microsoft | 3 Photoshop, Macos, Windows | 2026-09-11 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-89066 | 1 Aws | 1 Projen | 2026-09-11 | 7.8 High |
| Improper neutralization of special elements used in an OS command in the task synthesis component in projen before 0.103.0 might allow context-dependent attackers to execute arbitrary commands on a developer workstation or continuous integration runner via shell metacharacters in project configuration values and repository file names that are interpolated into generated task definitions. To remediate this issue, users should upgrade to version 0.103.0 and then re-synthesize the project so that .projen/tasks.json is regenerated with the corrected task definitions. Upgrading alone is not sufficient because the generated task definition file is committed to the repository. | ||||
| CVE-2026-89092 | 1 The Gnu C Library | 1 Glibc | 2026-09-11 | 4.2 Medium |
| The nscd service in the GNU C Library 2.3.4 onwards may crash due to a stack overflow when a malicious DNS server returns too large a response for a DNS query, resulting in degraded DNS resolution for the system. Exploitation of this bug needs a system that has nscd enabled and using an untrusted DNS server for name resolution, with the compromised DNS server being capable of processing records large enough to result in a stack overflow in an nscd thread stack. During experimentation, bind 9 was unable to handle large records, but that could change in future or with a different name server. In typical installations, nscd is executed in an isolated context as its own user without a shell, due to which any compromise of that service is isolated. There is a remote possibility of nscd cache corruption if an attacker manages to get the stack pointer into a desired point in the heap, potentially resulting in other caches in nscd being overwritten with corrupt data through the stack overflow, until the buggy code path eventually results in a crash. Finally, a crash in nscd may result in performance degradation when resolving names, but it does not result in a denial of service. | ||||
| CVE-2026-65646 | 1 Webpros | 1 Plesk | 2026-09-11 | 8.8 High |
| Improper neutralization of special elements in in Plesk's DNS zone management functionality allows remote authenticated users to disclose arbitrary local files and escalate privileges. | ||||
| CVE-2026-88885 | 1 Renovatebot | 1 Renovate | 2026-09-11 | 7 High |
| Renovate before 44.14.7 contains a command injection vulnerability in the gomod manager when processing unescaped depName parameters in import-path update commands with binarySource=docker mode. Attackers can inject shell metacharacters through malicious dependency names to execute arbitrary commands as the Renovate user during Go module major version updates with postUpdateOptions gomodUpdateImportPaths enabled. | ||||
| CVE-2026-89010 | 2026-09-11 | 9.8 Critical | ||
| WAVLINK WN535M1 and WN535M3 routers running firmware prior to M35M1_V250922 contain an unauthenticated OS command injection vulnerability that allows remote attackers to execute arbitrary commands as root by sending crafted filenames to the sync_server daemon on TCP port 13136. The daemon interpolates attacker-controlled filename input containing shell metacharacters into a shell command string via sprintf() and passes it to system() without sanitization, enabling root-level command execution on the device. | ||||
| CVE-2026-89157 | 1 Pcre | 1 Pcre2 | 2026-09-11 | 5.7 Medium |
| PCRE2 before 10.48, on 32-bit platforms, has a pcre2_pattern_convert out-of-bounds write when an attacker can provide a large pattern. | ||||
| CVE-2026-89158 | 1 Pcre | 1 Pcre2 | 2026-09-11 | 6.5 Medium |
| PCRE2 before 10.48, on 32-bit platforms, has a pcre2_compile_32 integer overflow and resultant out-of-bounds write. | ||||
| CVE-2026-85979 | 2026-09-11 | N/A | ||
| Affected versions of Puppet Enterprise contain a command injection vulnerability in the handling of the java_keystore_passwd parameter. An authenticated user with Puppet administrative privileges can inject arbitrary shell commands by providing a specially crafted value for this parameter, which is passed to a shell execution context without sufficient sanitization. Because the resulting commands are executed with root privileges, successful exploitation can lead to full compromise of the affected system. | ||||
| CVE-2026-81467 | 2026-09-11 | 9.8 Critical | ||
| Dell ThinOS 10, versions prior to 2605_10. 2616, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | ||||
| CVE-2026-88053 | 2026-09-11 | 8.4 High | ||
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. | ||||
| CVE-2026-81468 | 2026-09-11 | 9.1 Critical | ||
| Dell ThinOS 10, versions prior to 2605_10. 2616, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | ||||
| CVE-2026-28384 | 1 Canonical | 1 Lxd | 2026-09-11 | 9.9 Critical |
| An improper sanitization of the compression_algorithm parameter in Canonical LXD allows an authenticated, unprivileged user to execute commands as the LXD daemon on the LXD server via API calls to the image and backup endpoints. This issue affected LXD from 4.12 through 6.6 and was fixed in the snap versions 5.0.6-e49d9f4 (channel 5.0/stable), 5.21.4-1374f39 (channel 5.21/stable), and 6.7-1f11451 (channel 6.0 stable). The channel 4.0/stable is not affected as it contains version 4.0.10. | ||||