Export limit exceeded: 25925 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25925 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-86093 | 1 Ibm | 1 Db2 | 2026-09-11 | 7.5 High |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.5 could allow an attacker with the ability to control or impersonate a DRDA server endpoint to execute arbitrary commands on Db2 clients due to a stack-based buffer overflow that improperly copies user-controlled data into a fixed-size stack buffer without bounds checking. | ||||
| CVE-2026-49838 | 1 Osrg | 1 Gobgp | 2026-09-11 | 5.9 Medium |
| GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. Prior to version 4.7.0, GoBGP accepts a zero-length AS_PATH during UPDATE decoding and later panics while validating that attribute for a confederation eBGP peer. The vulnerable path is in the BGP UPDATE validator: a malformed UPDATE that should be rejected as a malformed AS_PATH instead reaches an unchecked `p.Value[0]` access, allowing a configured confederation eBGP peer to trigger a denial of service. Version 4.7.0 patches the issue. | ||||
| CVE-2026-48490 | 2026-09-11 | N/A | ||
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.8 allows an attacker to trigger a stack-based buffer overflow when concatenating floating-point values of sufficiently large magnitude onto an Arduino String object. By passing values near the extremes of the float or double range to `String::concat(float)`, `String::concat(double)`, `String::operator+=()`, or the `+` operator with a float/double operand, `dtostrf()` writes beyond the fixed-size stack buffer, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards. The fix is included starting from the `1.8.8 `release. | ||||
| CVE-2026-89743 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: nsm: bound the device-reported response length nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported by the NSM device into msg->resp.len without bounding it to the response buffer. A malicious or buggy backend can report a length larger than the response buffer; parse_resp_raw() then copies that many bytes out of the fixed buffer to user space, disclosing adjacent kernel heap (an out-of-bounds read). The request path already floors its length in fill_req_raw(); the response path lacks the symmetric check. Clamp the stored length to the size of the response buffer. Well-behaved devices report no more than the posted buffer size, so conforming traffic is unaffected. | ||||
| CVE-2026-89726 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen() Patch series "lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()", v2. This series fixes an off-by-one out-of-bounds read in ucs2_strnlen(). The first patch is the real fix, the second patch comes as a bonus and fixes the code indentation. This patch (of 2): ucs2_strnlen() checks the current character before checking whether the caller-provided maximum length has been reached. If the input is not NUL-terminated within that bound, the loop can read one ucs2_char_t past the limit. Test the length before dereferencing to prevent an off-by-one out-of-bounds read. | ||||
| CVE-2026-89722 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io() pci_write_legacy_io() loads 4 bytes from the kernfs write buffer regardless of how many bytes userspace wrote: if (count != 1 && count != 2 && count != 4) return -EINVAL; return pci_legacy_write(bus, off, *(u32 *)buf, count); kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1), so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and the unconditional u32 load reads up to 2 bytes past the end of the allocation, which KASAN reports as a slab-out-of-bounds read. Similarly, a 2-byte write overreads by 1 byte. Thus, read only the number of bytes requested using get_unaligned_le16() and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the buffer as little-endian to match the byte ordering of PCI I/O port space. The PowerPC implementation previously compensated for the generic code's native-endian 32-bit load by shifting the value into place for the 1 and 2 byte cases. The shifts were only correct on big-endian kernels. On little-endian PowerPC (POWER8 and later), they extracted the wrong bytes, so a 1-byte write wrote an out-of-bounds byte instead of the requested value. On big-endian, the native load also caused out_le16() and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte writes. The little-endian helpers resolve both issues, so the shifts are removed. No changes are needed for the Alpha platform. The legacy_io file is root-only and exists only on Alpha and PowerPC, the two architectures that define HAVE_PCI_LEGACY. | ||||
| CVE-2026-89721 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: rockchip-samsung-dcphy: fix out-of-range max_register The PHY register block is 64KB, so with a register stride of 4 the last accessible register sits at offset 0xfffc. max_register names 0x10000, one register past the end of the mapping: dumping the registers through the regmap debugfs interface reads beyond the ioremapped region and oopses on the unmapped page. The oops fires with the regmap lock held, so later PHY operations deadlock. | ||||
| CVE-2026-89720 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: fix out-of-bounds read in signature length check ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field before handing the signature payload to verify_pkcs7_signature(), but the check has the wrong sign: if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node)) The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ, 64 bytes) into the node, so the payload is at most snod->len - sizeof(struct ubifs_sig_node) bytes long. Adding the header size instead of subtracting it accepts a declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually holds -- past the end of c->sbuf, which is vmalloc(c->leb_size). verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder() is then handed that inflated length and reads beyond the allocation while walking the DER headers. The node length comes straight from the mounted image, so a crafted signed UBIFS image reaches this via ubifs_read_superblock() before the signature is cryptographically checked. snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner (c->ranges[UBIFS_SIG_NODE].min_len == UBIFS_SIG_NODE_SZ), so the corrected subtraction cannot underflow. Legitimately signed images are unaffected: a correct superblock never declares a signature longer than the node it is embedded in. | ||||
| CVE-2026-89701 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: validate nseconds in TIME_DELEG decode paths The xdrgen-based TIME_DELEG_ACCESS and TIME_DELEG_MODIFY decode arms store a raw uint32_t nseconds directly into tv_nsec without enforcing nseconds < NSEC_PER_SEC. The legacy nfsd4_decode_nfstime4 has this check but the TIME_DELEG paths do not. A malformed timespec can propagate through notify_change() to disk. Add range checks in both nfs4xdr.c (SETATTR path) and nfs4callback.c (CB_GETATTR path). | ||||
| CVE-2026-89698 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: widen nfsd_genl_rqstp address fields to sockaddr_storage struct nfsd_genl_rqstp declares rq_daddr and rq_saddr as plain "struct sockaddr" (16 bytes). When an IPv6 NFS client is connected, nfsd_genl_rpc_status_compose_msg() casts these fields to "struct sockaddr_in6 *" (28 bytes) and reads sin6_addr at offset 8..24, which extends 8 bytes past the end of the 16-byte sockaddr field into the adjacent rq_flags member. The 16-byte nla_put_in6_addr then ships 8 bytes of truncated IPv6 address followed by 8 bytes of rq_flags to userspace via the NFSD_A_RPC_STATUS_SADDR6/DADDR6 netlink attributes. This is reachable by any unprivileged process in the network namespace because NFSD_CMD_RPC_STATUS_GET uses GENL_CMD_CAP_DUMP without GENL_ADMIN_PERM. Fix by widening rq_daddr and rq_saddr to struct sockaddr_storage so the IPv6 casts operate within bounds, copying sizeof(struct sockaddr_storage) bytes in the memcpy calls so the full address is captured, and zero-initializing the genl_rqstp stack variable to prevent leaking uninitialized tail bytes through netlink. | ||||
| CVE-2026-89673 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix XDR padding calculation in ff_encode_getdeviceinfo nfsd4_ff_encode_getdeviceinfo() computes the da_addr_body reservation as 16 + netid_len + addr_len, but the subsequent xdr_encode_opaque() calls emit 8 + round_up(netid_len, 4) + round_up(addr_len, 4) bytes. The mismatch means the declared da_addr_body length exceeds the actual encoded data by 2-8 bytes on every flexfile GETDEVICEINFO reply, leaking stale reply-page content to the client and mis-aligning the subsequent version list decode. Use xdr_align_size() for each string length to match what xdr_encode_opaque() actually writes. | ||||
| CVE-2026-89657 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: validate OSD extent maps before cursor advance net/ceph/osd_client.c:osd_sparse_read() validates that the sparse-read data length matches the summed extent lengths, but it does not validate that each OSD-supplied extent is monotonic and lies inside the original request range. A malformed authenticated OSD reply can advertise a far-forward nonzero extent offset with a matching data length and make the client advance the message-data cursor beyond the request buffer. This reaches the BUG_ON(!*length) assertion in ceph_msg_data_next() from the client receive path. Impact: A malicious or compromised authenticated Ceph OSD peer can crash a kernel Ceph client via a malformed sparse-read reply. Reject sparse extent maps that overflow, move backwards, overlap, or extend outside the original sparse-read request before advancing the cursor. [ idryomov: perform sparse_extent_map_valid() check a bit earlier, in CEPH_SPARSE_READ_DATA_LEN instead of CEPH_SPARSE_READ_DATA_PRE state ] | ||||
| CVE-2026-89652 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name(). | ||||
| CVE-2026-89651 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound MDSCapAuth path and fs_name decode in handle_session() handle_session() decodes the MDSCapAuth records carried by a CEPH_SESSION_OPEN message (msg_version >= 6). For each record the match.path and match.fs_name byte strings are read by first decoding a 32-bit length and then copying that many bytes with the bare ceph_decode_copy(). Unlike the surrounding fields, which all use the _safe decode variants, these two copies are not preceded by a ceph_decode_need() bounds check, and the enclosing MDSCapAuth and MDSCapMatch struct_len fields are skipped rather than enforced as an upper bound. A length larger than the bytes remaining in the message front makes ceph_decode_copy() read past the end of the front buffer. The message front is a dedicated allocation (ceph_msg_new2() -> kvmalloc), so the over-read runs off that object. A malicious or compromised MDS can trigger this with the first post-connect message on mount, with no client-side user interaction; under KASAN it is reported as a slab-out-of-bounds read in handle_session(). Impact: a malicious MDS can force the kernel client to read up to 4 GiB past the message front allocation during session setup, crashing the client (out-of-bounds read). Switch both copies to ceph_decode_copy_safe(), which performs the ceph_decode_need() bounds check before the copy and branches to the existing bad label, matching the rest of the decoder and the error path that frees the partially decoded cap_auths array. | ||||
| CVE-2026-89650 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound num_export_targets array for mds info v2/v3 ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from each per-mds info record and advances the decode cursor by num_export_targets * sizeof(u32) without first checking that many bytes remain. The only upper-bound check that catches a runaway cursor (*p > info_end) is gated on info_v >= 4, because info_end is left NULL for info_v 2 and 3. When the monitor sends an MDS map whose per-mds info version is 2 or 3 with an oversized num_export_targets, the cursor moves past the message front buffer and the later export-targets loop calls the unchecked ceph_decode_32() on out-of-bounds memory. A kernel client processes CEPH_MSG_MDS_MAP from its monitor session (net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an on-path attacker on an unsigned/unencrypted messenger session, can therefore drive an out-of-bounds read in the client kernel; on x86_64 with KASAN it is reported as a slab-out-of-bounds read in ceph_mdsmap_decode(). The decoded values land in the internal info->export_targets[] array, so the consequence is a kernel out-of-bounds read, not an information leak to the attacker. Impact: a malicious or compromised Ceph monitor sending an MDS map with a per-mds info version of 2 or 3 and an oversized num_export_targets field triggers an out-of-bounds read in the CephFS client kernel. Add a ceph_decode_need() for the export-targets array before advancing the cursor, so the bound is enforced for every info_v >= 2, not only info_v >= 4. This mirrors the count-then-need idiom already used for m_data_pg_pools later in the same function. Compute the export-targets byte count with size_mul() and reuse that checked length when advancing the cursor, so the attacker-controlled num_export_targets multiplication fails closed on overflow rather than relying on the later kcalloc() guard. | ||||
| CVE-2026-89649 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound xattr value length in __build_xattrs() __build_xattrs() decodes the MDS-supplied xattr blob one attribute at a time. For each attribute it reads a 32-bit name length, advances past the name bytes, reads a 32-bit value length, records the value pointer, and advances past the value bytes. The two length fields are read with ceph_decode_32_safe(), but the value bytes themselves are advanced over with a bare "p += len" and no ceph_decode_need() check that "len" bytes remain in the blob. For every attribute except the last, the next iteration's ceph_decode_32_safe() on the following name length implicitly verifies that the previous value did not run past the blob end. The final attribute has no successor, so its decoded value length is never checked against the blob bounds. A malicious or compromised metadata server can set the last attribute's value length larger than the bytes actually present in the blob. The blob is a dedicated kvmalloc() allocation sized to the wire length (ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the oversized length in xattr->val_len verbatim, and a later getxattr(2) runs memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer, copying bytes past the end of the allocation back to user space. Impact: a malicious metadata server discloses adjacent kernel heap bytes to a local user via getxattr(2) on a CephFS file. Add the missing ceph_decode_need() so an out-of-bounds value length on the final attribute fails the decode and returns -EIO instead of being stored. | ||||
| CVE-2026-89634 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||
| CVE-2026-89631 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it. | ||||
| CVE-2026-89630 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: restore the data_offset bound in is_valid_oplock_break() Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr") changed the quantity this bound is measured against. It used to be srv->total_read minus the 4-byte RFC1002 preamble that total_read then included, so it was the SMB message length. The same commit stopped counting the preamble, and the mechanical substitution to srv->total_read - srv->pdu_size left an expression that is identically zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly pdu_length - MID_HEADER_SIZE() more, adding both to total_read. len is therefore 0, the subtraction below it wraps, and no __u32 DataOffset can exceed the result, so the check from commit 097f5863b1a0 ("cifs: read overflow in is_valid_oplock_break()") no longer rejects anything. Use total_read, which is now the message length on its own. | ||||